Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12

D. The reflash tool should power up and display

PROGRAM VEHICLE at the top of the

screen. Press the SELECT button. See Fig

14D

E. PREPROGRAMED TUNE will be displayed

at the top of the screen. Press the SELECT

button. See Fig 14E

F. Read the disclaimer entirely, then press the

SELECT button if you agree with the terms

of the disclaimer. See Fig 14F

G. At this point you will need to turn the ignition

to the ON position (do not start the vehicle).

Set the parking brake and press the SELECT

button to continue. See Fig 14G

H. The reflash tool will proceed to check the

Operating System (OS) part number of the

vehicles ECU. See Fig 14H

NOTE: If you have any questions throughout this proce-

dure, please contact our service department for

further assistance.

Fig 14D

Fig 14E

Fig 14F

Fig 14G

Fig 14H