Owner's manual

P/N: 4GE020-010 v4.0, 2012-12-12
©2012 Vortech Engineering, INC.
All Rights Reserved, Intl. Copr. Secured
65
Fig 14K
Fig 14M
Fig 14N
Fig 14L
K. PROGRAM VEHICLE will be displayed at the
top of the screen. At this time make sure you
have turned off any additional accessories
that may cause unnecessary draw on the
vehicles battery (headlights, radio, etc.).Press
the SELECT button to proceed with BEGIN
PROGRAM. See Fig 14K
L. Automatic vehicles will require a second
selection. See Fig 14L.
NOTE: Once the programming sequence has been start-
ed use care NOT to disturb the cable, or turn the
ignition or any accessories on or off during this
time. Throughout the programming sequence it is
normal for the Reflash tool to AUTOMATICALLY
cycle the vehicles power on and off. If the pro-
gramming is disrupted, permanent damage to the
vehicles computer may result!