Instruction Manual

DP/N: 007128v1.1, 2012-04-30

iiii

FOREWORD

Take note of the following before proceeding:

1. Proper installation of this accessory requires general automotive

mechanic knowledge and experience. Please browse through each step

of this instruction manual prior to beginning the installation to determine if

you should refer the job to a professional installer/technician. Please con-

tact your dealer or Vortech Engineering for possible installers in your

area.

2. This product was designed for use on stock (un-modified, OEM)

vehicles. The PCM (computer), engine, transmission, drive axle

ratios and tire O.D. must be stock. If the vehicle or engine has been modi-

fied in any way, check with Vortech prior to installation and use of this product.

3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).

4. Always listen for any sign of detonatlion (knocking/pinging) and discontinue hard

use (no boost) until the problem is resolved.

5. Vortech is not responsible for any clutch, transmission, drive-line or engine dam-

age.

Exclusions from Vortech warranty coverage considerations

include, but not limited to:

1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.

2. Continued operation with an impaired vehicle or sub-system.

3. The combined use of Vortech components with other modifications such as, but

not limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party

PCM programming or other such changes.

another language in any form, by any means without written permission of Vortech Engineering, Inc.

All information, illustrations and specifications contained herein are based on the latest

product information available at the time of this publication. Changes to the manual may be

made at any time without notice. Contact Vortech Engineering for any additional informa-

tion regarding this kit and any of these modifications at (805) 247-0226 7:00am-3:30pm

PST.

STOP