User Manual

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
5
Fig 2F
iii. Temporarily assemble the aluminum A/C
pulley onto the back of the hub with the
pulley’s“snout”facingtowardthedamper.
Insertthethree(3)3/8-16x2.5”12-ptcap
screws (supplied with damper) into the
three unthreaded holes passing through
the hub and thread them into the three (3)
3/8-16 holes in the A/C pulley. Do not
tighten. See Fig. 2D.
B. Transfer the OEM rubber seal from the OEM
damper assembly to the corresponding loca-
tion on the new damper assembly as shown
in Figures 2E & 2F.
Fig 2D
Fig 2E