User Manual

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
20
N. Locate the front tensioner support plate with
the following (see Figures 5K, 5L, 5M):
i. Nine(9)1.434”spacers
ii. Two(2)3/8-16x2.75”screwswithwash-
ers
iii. One (1) M12-1.75 x 20mm screw (no
washer)
iv. Three (3) M10-1.5 x 55mm screws with
washers
v. One (1) M10-1.5 x 120mm screw with
washer (from the drive assembly)
vi. One (1) M10-1.5 x 110mm screw with
washer (from the drive assembly)
Fig 5K
6 X 3.566"
SPACERS
3 X 2.981"
SPACERS
9 X 1.434"
SPACERS