User Manual

P/N: 4GE020-015 v1.0, 2010-05-24
©2010 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
ix
UNIVERSAL LSX KIT, YSi, 50mm
Part No. 4GE218-140
IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages or
damaged parts immediately.
PARTS LIST
®
ENGINEERING, LLC
PART NO. DESCRIPTION QTY
008110 SMALL SILVER DIE CUT DECAL 2
008130 LICENSE PLATE FRAME, VORTECH 1
008443 S/C RACE INFO PKG ASSY VORT 1
2A158-060 S/C, V7 YSI, CW STRT, SATIN 1
4GE110-044 MTG BRKT ASSY 1
2A017-875-23 SPACER, .875 OD X .404 ID X 2 3
2A017-875-24 SPACER, .875 OD X .404 ID X 3 6
2A017-875-25 SPACER, .875 OD X .404 ID X 1 9
2A017-875-26 SPACER, .875 OD X .404 ID X 0 2
4GE010-010 BRACKET, CYLINDER HEAD, 2010 1
4GE010-020 BRACKET, P/S MOUNTING, 2010 1
4GE010-034 BRACKET, TENSIONER 2010 CAMARO 1
4GE010-044 BRACKET, S/C MOUNTING PLATE, 2 1
7A375-126 3/8-16 X 1.25 HHCS, GR8, PLT 3
7A375-275 3/8-16 X 2-3/4 HXCSG8P ZINC 2
7A375-300 3/8-16 X 3" HXCSG5P 1
7A375-400 3/8-16 X 4" BOLT HXHD GR8 1
7A375-451 3/8-16 X 4.50" HXHD GR5 ZINC 6
7A375-625 3/8-16 X 6-1/4 HX HD 1
7C010-030 M10 X 1.5 X 30 HXHD CL10.9 4
7C010-057 M10 X 1.5 X 55MM HX HD CL10.9 3
7C010-092 M10 X 1.5 X 90 BUTTON HD 1
7C010-120 M10 X 1.50 X 120 HXHD, CL10.9 1
7C012-022 M12 X 1.75 X 20MM THIN HD 1
7K375-040 3/8 AN960 FLAT WASHR PLATED 14
7K437-001 7/16" AN WASHER 10
7A375-475 3/8-16 X 4.75" HXHD GR8 PLTD 1
4GE116-030 DRIVE ASSY, COG 50MM, 75T/32T 1
7B500-325 ARBOR, S/C TENS PLY, S2000 1
7PA375-500 SCREW, IDLER ADJUST, 5.00" 1
4PFA010-031 BRACKT, IDLER ADJUST SCREW 1
7F500-020 1/2"-20 HEX JAM NUT GR5 ZINC 1
7A250-100 1/4-20 X 1 FLAT ALLEN 2
4FP116-020 IDLER W/BRNG ASSY, 50MM 1
2A032-032 S/C PULLEY, 32T (50MM) 1
4MA018-075 CRANK PLY, 75T GT 8MM X 2.5W 1
7C010-057 M10 X 1.5 X 55MM HX HD CL10.9 2
4FD017-011 PILOT, 6203/5 BRG, 1/2 SCREW 1
4GE017-031 IDLER SPCR, 1.085, COG, 2010 1
2A042-161 BELT, POWERGRIP GT2 1600 X 8MM 1
7A375-325 3/8-16 X 3-1/4 HX HD 3
7K437-001 7/16" AN WASHER 2
7U100-071 KEY,3/16 SQUARE X 1-1/8 LONG 1
2A040-011 PULLEY RETAINER, S/C 1
7B375-200 3/8-24 X 2" GR8 BOLT 1
7K375-040 3/8 AN960 FLAT WASHR PLATED 1
4GR110-110 ASSY, DAMPER PIN, LS1-LS2-LS6 1
4GE017-021 SPACER, CRANK PULLEY 1
7T100-250 DRILL BIT, Ø1/4" X 6" LONG HSS 1
4GE016-010 DAMPER, CRANK 1
4GE130-026 OIL FEED ASSY, 2010 CAMARO 1
7P016-125 M16 X 1.5 MALE TO 1/8 NPT FEMALE 1
7P125-004 1/8 NPT 90° X -4 JIC FTG STL 1
7P125-005 1/8 NPT STR. X -4 JIC FTG STL 1
7U100-055 TIE WRAP, 7.5" NYLON 5
7U100-066 TIE WRAP, 11" NYLON 2
7U250-090-260 OIL FEED HOSE, 26" -4X90° 1
4FA130-036 OIL DRAIN ASSY 1
7U030-036 1/2" OIL DRAIN HOSE 2.33FT
7P375-017 3/8NPT X 1/2 BEADED HSE BRB 1
7R001-008 #8 STNLS HOSE CLAMP 2
4GE020-015 INSTR. MANUAL 1
PART NO. DESCRIPTION QTY