User's Manual

TimeLord Master Clocks
Operating and Installation Instructions
Issue 2.0 D-4
Netclient Setting Mode, with Network update
flashing. This mode cannot be exited if set to ‘y’.
Use ‘+’ and ‘-’ to change setting. When
set to ‘y’ the netUpdate software on the
TimeLord CDROM can be used to install a
software upgrade into the TimeLord.
(Available on future versions)
Normal time display
Use ‘+’ and ‘-’ to change setting.
Use ‘+’ and ‘-’ to change setting.
Netclient Setting Mode, with NTP Server
IP Address 3rd byte flashing.
Netclient Setting Mode, with NTP Server
IP Address 4th byte flashing.