RIFLESCOPE RIFLESCOPE MANUAL
diamondback RIFLESCOPE The Vortex® Diamondback® HP™ Riflescopes Specifically designed for the most discriminating hunters and shooters, the Vortex®Diamondback®HP™ series of riflescopes offer the highest levels of performance and reliability. With features such as 4x optical zooms, side focus, generous long eye relief, and ruggedly constructed single-piece main tubes, these Diamondback riflescopes are ready for any situation.
diamondback RIFLESCOPE Reticle Options Riflescope Adjustments The Focal Plane All riflescope reticles can be termed either first focal plane (FFP) or second focal plane (SFP), depending upon their internal location within Reticle Focus The Diamondback HP riflescopes use a fast focus eyepiece designed to the riflescope. This model features the second focal plane design. quickly and easily adjust the focus on the riflescope’s reticle.
diamondback RIFLESCOPE Windage and Elevation Adjustments Using the Side Focus The Diamondback HP riflescope incorporates adjustable elevation and Diamondback HP riflescopes use a side focus adjustment which provides windage turret dials with audible clicks. Each audible click moves the maximum image sharpness and eliminates parallax error. bullet’s point-of-impact 1/4 of a minute of angle (MOA). Setting the side focus: 1/4 MOA closely corresponds to 1/4 inch at 100 yards, 1/2 inch at 200 1.
diamondback RIFLESCOPE Riflescope Mounting Eye Relief and Reticle Alignment To get the best performance from your Diamondback HP riflescope, After installing the bottom ring halves on the mounting base, place the proper mounting is essential. Although not difficult, the correct steps must riflescope on the bottom ring halves and loosely install the upper ring be followed. If you are unsure of your abilities, it would be best to use the halves.
diamondback RIFLESCOPE Bore Sighting Final Range Sight-In Initial bore sighting of the riflescope will save time and money at the range. After the riflescope has been bore-sighted, final sight-in should be done This can be done in a number of ways. A mechanical or laser bore sighter can be used according to the manufacturer’s instructions. On some rifles, bore sighting can be done by removing the bolt and sighting through the barrel.
diamondback RIFLESCOPE Indexing Adjustment Dials with Zero Reset Maintenance Diamondback HP riflescopes feature windage/elevation dials that allow Cleaning you to re-index the zero indicator after sight-in without disturbing your The fully waterproof and fogproof Diamondback HP riflescope requires settings.
diamondback RIFLESCOPE Troubleshooting The VIP Warranty Sighting-in Problems We build optics based on our commitment to your absolute satisfaction. Many times, problems thought to be with the scope are actually mount That’s why Vortex products are unconditionally guaranteed and we make problems. Be sure that correct base and rings are being used in the correct this Very Important Promise to you—a Very Important Person. orientation, and that the base screws and rings are tight.
RIFLESCOPE WWW.VORTEXOPTICS.
