User Manual

5 4
Properly focus the binocular
For the best views, follow this two-step process to properly adjust
the center focus and diopter. Choose an object that is about 20
yards away from you and stay in the same spot until you have
adjusted the binocular for your eyes.
1. Adjust the center focus—start by closing your right eye
or covering the right objective lens
with your hand. Focus your left eye
on the object and adjust the center
focus wheel until the image is in focus.
Leave the center focus in this position
as you adjust the diopter.
2. Adjust the diopter—start by closing your left eye or covering
the left objective lens with your hand.
Look through your right eye and adjust
the diopter ring (found on the right
eyepiece) until the object is in focus.
Make note of this diopter setting in
case you need to set it again. From this point on, you will only
need to use the center focus wheel.
The Raptor comes with a rainguard for the ocular lenses and
tethered objective lens covers. Use these covers to protect the
lenses whenever you are not viewing.
Lens Covers
The Raptor’s protective case provides safe storage between viewing
sessions. The carry strap is already attached to the case.
Carry Case
ACCESSORIES
Attach the padded neckstrap to the Raptor in three simple steps.
Begin with the right barrel of the binocular and repeat the process
for the left barrel.
Neckstrap
1. Push a few
inches of the strap
through the strap
attachment on the
binocular.
3. Adjust the
overall length,
then pull the tight
until strap secured
within the buckle.
2. Hold the buckle
and thread the end of
the strap through the
buckle.
Note: If using another type of strap, never attach metal o-rings directly
onto the strap attachment.