RED DOT The Vortex SPARC II Red Dot Sight ® The rugged, streamlined SPARC® II with daylight-bright red dot lends itself to a variety of firearm platforms including AR-15s, shotguns and pistols. The multi-height base offers four mounting heights for user- and weapons-specific customization. Get on target fast with the SPARC II.
RED DOT Red Dot Adjustments Brightness Adjustments Battery Installation The SPARC II red dot sight offers ten variable illumination settings—the lowest two settings are night-vision compatible. Adjust the dot brightness by tapping the appropriate Up or Down adjustment control button. Remove the battery compartment cover. Be sure the metal tether doesn’t add tension to the cap as you remove it. Install one CR 2032 battery so the “+” lettering faces outward and replace the cover.
RED DOT Windage and Elevation Adjustments Mounting the SPARC II The SPARC II red dot incorporates elevation and windage dials with To get the best results from your SPARC II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base. If needed, these may be purchased at most firearms dealers.
RED DOT Mount Height Options The SPARC II can be mounted on a variety of platforms using various combinations of the high mount, low mount and spacer. Note: To ensure the attachment screws do not loosen under use, Vortex recommends using a thread locker compound. Multi-Height Mount System The heights as listed in millimeters refer to distance from the center of the red dot image to the base surface height of the firearm.
RED DOT Sighting In Shooting with the SPARC II Bore Sighting The key thing to remember when shooting with the SPARC II red dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target! After mounting, an initial bore sighting of the SPARC II at short range (25–50 yards) will save time and money at the range.
RED DOT Maintenance The VIP Warranty Cleaning We build optics based on our commitment to your absolute satisfaction. That’s why Vortex products are unconditionally guaranteed and we make this Very Important Promise to you—a Very Important Person. The SPARC II red dot will require very little routine maintenance other than periodically cleaning the exterior lenses. If desired, the exterior may be cleaned by wiping with a soft, dry cloth.
