StrikeFire ® RED DOT The Vortex Strikefire II Red Dot Sight ® Fast, reliable and perfect for the AR platform, this StrikeFire®II comes with a lower 1/3 co-witness cantilever ring mount. Dot intensity is adjustable to perfectly match any lighting condition. Step up the speed of your game with the StrikeFire II.
StrikeFire ® RED DOT Red Dot Adjustments Brightness Adjustments Battery Installation The Vortex StrikeFire II red dot sight offers ten variable illumination settings—the lowest two settings are night-vision compatible. Adjust the dot brightness by tapping the appropriate Up or Down adjustment control button. Remove the battery compartment cover. Orient the CR2 battery so the negative end faces outward, then replace the cover.
StrikeFire ® RED DOT Windage and Elevation Adjustments The Vortex StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc. Example At a 50 yard sight-in distance, it will take four clicks of the dial to move the bullet’s point-of-impact one inch.
StrikeFire ® RED DOT Mounting the StrikeFire II Attaching the Ring Mount To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base. If needed, these may be purchased at most firearms dealers. If you are unsure of your abilities, it would be best to use the services of a qualified gunsmith.
StrikeFire ® RED DOT Sighting in Shooting with the StrikeFire II Bore Sighting The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical.
StrikeFire ® RED DOT Maintenance The VIP Warranty Cleaning We build optics based on our commitment to your absolute satisfaction. That’s why Vortex products are unconditionally guaranteed and we make this Very Important Promise to you—a Very Important Person. The Vortex StrikeFire II requires very little routine maintenance other than to periodically clean the exterior lenses. The exterior of the red dot may be cleaned by wiping with a soft, dry cloth.
