HS RIFLESCOPE rIFLESCOPE mANUAL Second Focal Plane Reticle
HS RIFLESCO PE The Vortex® Viper® HS™ Riflescopes Specifically designed for the most discriminating hunters and shooters, the Vortex®Viper®HS™ series of riflescopes offer the highest levels of performance and reliability. With features such as 4x optical zooms, generous long eye relief, and ruggedly constructed, single-piece main tubes. The Viper HS riflescopes are ready for any situation.
HS RIFLESCO PE Reticle Options Riflescope Adjustments The Focal Plane All riflescope reticles can be termed either first focal plane (FFP) or second focal plane (SFP), depending upon their internal location within Reticle Focus The Viper HS riflescopes use a fast focus eyepiece designed to quickly and the riflescope. This model features the second focal plane design. easily adjust the focus on the riflescope’s reticle.
HS RIFLESCO PE Windage and Elevation Adjustments Using the Side Focus The Viper HS riflescope incorporates adjustable elevation and windage Select Viper HS riflescopes use a side focus adjustment which provides turret dials with audible clicks. Each audible click moves the bullet’s point- maximum image sharpness and eliminates parallax error. The Viper HS of-impact 1/4 of a minute of angle (MOA). 2.
HS RIFLESCO PE Riflescope Mounting Eye Relief and Reticle Alignment To get the best performance from your Viper HS riflescope, proper After installing the bottom ring halves on the mounting base, place the mounting is essential. Although not difficult, the correct steps must be riflescope on the bottom ring halves and loosely install the upper ring followed. If you are unsure of your abilities, it would be best to use the halves.
HS RIFLESCO PE Bore Sighting Final Range Sight-In Initial bore sighting of the riflescope will save time and money at the range. After the riflescope has been bore-sighted, final sight-in should be done at This can be done in a number of ways. A mechanical or laser bore sighter can be used according to the manufacturer’s instructions. On some rifles, bore sighting can be done by removing the bolt and sighting through the barrel. the range using the exact ammunition expected to be used while shooting.
HS RIFLESCO PE Indexing Adjustment Dials with Zero Reset Maintenance Viper HS riflescopes feature windage and elevation dials that will allow Cleaning you to re-index the zero indicator after sight-in without disturbing your settings. This allows you to quickly return to your original zero The fully waterproof and fogproof Viper HS riflescope requires very little routine maintenance other than periodically cleaning the exterior lenses. if temporary corrections are used in the field.
HS RIFLESCO PE Troubleshooting The VIP Warranty Sighting-in Problems We build optics based on our commitment to your absolute satisfaction. Many times, problems thought to be with the scope are actually mount That’s why Vortex products are unconditionally guaranteed and we make problems. Be sure that correct base and rings are being used in the correct this Very Important Promise to you—a Very Important Person. orientation, and that the base screws and rings are tight.
HS RIFLESCOP E WWW.VORTEXOPTICS.
