HS LR RIFLESCO PE HS LR RIFLESCOP E rIFLESCOPE mANUA L Second Focal Plane Reticle
HS LR RIFLESCO PE The Vortex® Viper® HS LR™ Riflescopes The Vortex®Viper®HS LR™ riflescopes are intended for dedicated long range hunters. Using a specially designed uncapped, rapid travel elevation turret with our CRS zero stop, this riflescope accommodates the unique needs of hunters who prefer to “dial in” elevation adjustments for long range shots. The Viper HS LR series riflescopes also provide an ideal platform for the optional Vortex TMT custom turret caps. Visit our website, www.vortexoptics.
HS LR RIFLESCO PE RETICLE OPTIONS RIFLESCOPE ADJUSTMENTS The Focal Plane Reticle Focus All riflescope reticles can be termed either first focal plane (FFP) or second focal plane (SFP), depending upon their internal location within the riflescope. This model features the second focal plane The Viper HS LR riflescope uses a fast focus eyepiece designed to quickly and easily adjust the focus on the riflescope’s reticle. To adjust the reticle focus: design.
HS LR RIFLESCO PE Windage and Elevation Adjustments Turret Rotation The Vortex Viper HS LR riflescope incorporates precision finger Vortex Viper HS LR riflescopes incorporate Vortex’s patented Radius adjustable elevation and windage dials with audible clicks. Bar to visually assist in keeping track of turret rotations. The Radius Bar To make adjustments: provides a quick visual reference that allows the shooter to confirm: Elevation Knob 1.
HS LR RIFLESCO PE Customizable Rotational Stop (CRS) Using the Side Focus Viper HS LR riflescope elevation turrets incorporate the unique CRS Viper HS LR riflescopes use a side focus adjustment which provides rotation stop feature. After the rifle is sighted in, the design of the maximum image sharpness and eliminates parallax error. CRS allows a shooter to quickly and easily return to an original zero point when using the elevation turret to dial-in temporary bullet drop Setting the side focus: 1.
HS LR RIFLESCO PE RIFLESCOPE MOUNTING Eye Relief and Reticle Alignment To get the best performance from your Viper HS LR riflescope, proper After installing the bottom ring halves on the mounting base, place the mounting is essential. Although not difficult, the correct steps must be riflescope on the bottom ring halves and loosely install the upper ring followed. If you are unsure of your abilities, it would be best to use the halves.
HS LR RIFLESCO PE Bore Sighting Final Range Sight-In and CRS Stop-Set Initial bore sighting of the riflescope will save time and money at the range. After the riflescope has been bore-sighted, final sight-in and CRS stop-set This can be done in a number of ways. A mechanical or laser bore sighter can be used according to the manufacturer’s instructions. On some rifles, bore sighting can be done by removing the bolt and sighting through the barrel. should be done at the range.
HS LR RIFLESCO PE SETTING THE CRS STOP AND INDEXING ELEVATION KNOB 4. Align the turret cap so the “0” mark on the cap matches up with the After obtaining a satisfactory zero, the CRS stop can be set using the “0” reference line on the turret post. Again, be sure not to rotate the following technique: 1. Loosen the three turret cap retaining screws on the elevation turret. Gently pull the turret cap straight up and off of the turret post—being careful not to rotate the turret post.
HS LR RIFLESCO PE USING THE CRS ZERO STOP MAINTENANCE Once the CRS shims are installed, the elevation dial will stop turning Cleaning shortly past the original zero point when being returned (turning clockwise The fully waterproof and fogproof Viper HS LR riflescope requires very direction) from a temporary elevation adjustment. little routine maintenance other than periodically cleaning the exterior lenses. The exterior of the scope may be cleaned by wiping with a soft, dry cloth.
HS LR RIFLESCO PE TROUBLESHOOTING THE VIP WARRANTY Sighting-in Problems We build optics based on our commitment to your absolute satisfaction. Many times, problems thought to be with the scope are actually mount That’s why Vortex products are unconditionally guaranteed and we make problems. Be sure that correct base and rings are being used in the correct this Very Important Promise to you—a Very Important Person. orientation, and that the base screws and rings are tight.
HS LR RIFLESCO PE HS LR RIFLESCOP E WWW.VORTEXOPTICS.
