HS LR RIFLESCOPE rIFLESCOPE mANUAL First Focal Plane Reticle | Capped Turrets
HS LR RIFLESCOPE The Vortex® Viper® HS LR™ Riflescopes Specifically designed for the most discriminating hunters and shooters, the Vortex®Viper®HS LR™ series of riflescopes offer the highest levels of performance and reliability. With features such as 4x optical zooms, generous long eye relief, and ruggedly constructed 30 mm main tubes, this Viper riflescope is ready for any situation.
HS LR RIFLESCOPE RETICLE OPTIONS RIFLESCOPE ADJUSTMENTS The Focal Plane All riflescope reticles can be termed either first focal plane (FFP) or second focal plane (SFP), depending upon their internal location within Reticle Focus This Viper HS LR riflescope uses a fast focus eyepiece designed to the riflescope. This model features the first focal plane design. quickly and easily adjust the focus on the riflescope’s reticle.
HS LR RIFLESCOPE Windage and Elevation Adjustments Using the Side Focus The Viper HS LR riflescope incorporates adjustable elevation and windage This Viper riflescope uses a side focus adjustment which provides maximum dials with audible clicks. Each audible click moves the bullet’s point-of- image sharpness and eliminates parallax error. impact 1/4 of a minute of angle (MOA). Setting the side focus: 1/4 MOA closely corresponds to 1/4 inch at 100 yards, 1/2 inch at 200 1.
HS LR RIFLESCOPE RIFLESCOPE MOUNTING Eye Relief and Reticle Alignment To get the best performance from your Viper HS LR riflescope, proper After installing the bottom ring halves on the mounting base, place the mounting is essential. Although not difficult, the correct steps must be riflescope on the bottom ring halves and loosely install the upper ring followed. If you are unsure of your abilities, it would be best to use the halves.
HS LR RIFLESCOPE Bore Sighting Final Range Sight-In Initial bore sighting of the riflescope will save time and money at the range. After the riflescope has been bore-sighted, final sight-in should be done This can be done in a number of ways. A mechanical or laser bore sighter at the range using the exact ammunition expected to be used while can be used according to the manufacturer’s instructions. On some rifles, shooting. Sight in and zero the riflescope at the preferred distance.
HS LR RIFLESCOPE Indexing Adjustment Dials with Zero Reset MAINTENANCE Viper HS LR riflescopes feature windage and elevation dials that allow Cleaning you to re-index the zero indicator after sight-in without disturbing your settings. This allows you to quickly return to your original zero if temporary corrections are used in the field. Index the windage and elevation dials in this way: 1. Remove the outer cap and pull the adjustment dial outward against the spring tension until it stops. 2.
HS LR RIFLESCOPE TROUBLESHOOTING THE VIP WARRANTY Sighting-in Problems We build optics based on our commitment to your absolute satisfaction. Many times, problems thought to be with the scope are actually mount That’s why Vortex products are unconditionally guaranteed and we make problems. Be sure that correct base and rings are being used in the correct this Very Important Promise to you—a Very Important Person. orientation, and that the base screws and rings are tight.
HS LR RIFLESCOP E WWW.VORTEXOPTICS.
