RIFLESCOPE riflescope Manual 1-4x24 with Capped Turrets
RIFLESCOPE The Vortex® Viper® PST 1-4x24 Riflescope tm Intended for the most demanding short and mid range shooters, the Viper® PSTtm 1–4x24 riflescope offers the highest levels of performance and reliability. With features such as a 4x optical zoom, generous long eye relief, ruggedly constructed 30 mm main tube, and daylight bright illumination, the Viper PST riflescopes can be relied upon in any situation.
RIFLESCOPE Riflescope Adjustments Windage and Elevation Adjustments Reticle Focus This Viper PST 1–4x24 riflescope incorporates adjustable elevation Vortex Viper PST riflescopes use a fast focus eyepiece designed to quickly and windage dials with audible clicks. Each audible click moves the and easily adjust the focus on the riflescope’s reticle. bullet’s point-of-impact 1/2 of a minute of angle (MOA).
RIFLESCOPE Variable Power Adjustments To change magnifications, turn the magnification ring to the desired level. The Vortex MagView system will Magnification Ring provide a low light reference for Riflescope Mounting To get the best performance from your Vortex Viper PST riflescope, proper mounting is MagView essential. Although not magnification level. difficult, the correct Illumination Adjustments steps must be followed.
RIFLESCOPE Eye Relief and Reticle Alignment Bore Sighting After installing the bottom ring halves on the mounting base, place the riflescope on the bottom ring halves and loosely install the upper ring halves. Before tightening the scope ring screws, adjust for maximum eye relief to avoid injury from recoil: 1. Set the riflescope to the middle of its magnification range. 2. Slide the riflescope as far forward as possible in the rings. 3.
RIFLESCOPE Final Range Sight-In Resetting Adjustment Dials with Zero Reset After the riflescope has been bore-sighted, final sight-in should be done at Viper PST riflescopes feature windage/elevation dials that will allow the range using the exact ammunition expected to be used while shooting. you to re-index the zero indicator after sight-in without disturbing Sight in and zero the riflescope at the preferred distance—usually 50 or your settings.
RIFLESCOPE Maintenance Troubleshooting Cleaning Sighting-in Problems The fully waterproof and fogproof Vortex Viper PST riflescope requires Many times, problems thought to be with the scope are actually mount very little routine maintenance other than periodically cleaning the problems. Be sure the mounts are tight to the rifle and the scope is exterior lenses. The exterior of the scope may be cleaned by wiping with a secured so it doesn’t twist or move in the rings. soft, dry cloth.
RIFLESCOPE The VIP Warranty We build optics based on our commitment to your absolute satisfaction. That’s why Vortex products are unconditionally guaranteed and we make this Very Important Promise to you—a Very Important Person. Rest assured that in the event your Viper PST becomes damaged or defective, Vortex Optics will repair or replace the riflescope at no charge to you. Call Vortex Optics at 800-426-0048 for prompt, professional, and friendly service.
RIFLESCOP E WWW.VORTEXOPTICS.
