User's Manual

AMG
®
UH-1
®
GEN II
HOLOGRAPHIC SIGHT
6 7
Powering Up
To turn the UH-1
®
on, press either the “+” or “-”
button. Use the plus (+) and minus (-) buttons to
adjust illumination levels. There are 15 illumination
settings for daytime illumination and 4 night vision
compatible settings.
To turn off, simultaneously press both the plus (+) and
minus (-) buttons.
Auto Shutoff
The UH-1
®
will automatically shut off after 14 hours if
no button is pressed. The 14-hour Auto Shutoff feature
can be disabled.
To disable the Auto Shutoff feature, press the minus
button (-) for 5 seconds. The reticle will blink twice
to confirm. To reenable the feature, press the plus
button (+) for 5 seconds. The reticle will blink three
times to confirm.
Note: When the Auto Shutoff feature is disabled, you must
remember to manually turn off the sight. Otherwise the sight
will stay on until the battery runs completely out.
Night-Vision Button
The UH-1
®
is night-vision compatible. The Night-Vision
(NV) Button toggles the UH-1
®
to night-vision mode.
There are 4 settings available in NV mode.
To set the UH-1
®
to night-vision mode, press and hold
the NV button. Adjust the illumination setting to your
preferred brightness.
Press and hold the NV button to return the UH-1
®
to
the last daylight illumination setting. The UH-1
®
will
return to the last NV setting used the next time you
return to NV mode.
Night-Vision
Button
Note: When in night-vision mode, the reticle will only be visible
with the use of a night-vision unit.