User's Manual

7 6
BINOCULAR
CROSSFIRE
®
HD
Lens Covers
The Crossfire
®
HD comes with tethered objective lens covers
and a rainguard for the ocular lenses. Use these covers to
protect the lenses whenever you are not using your binocular.
Neck Strap
Attach the padded neck strap in these three simple steps.
Note: If using another type of strap, never attach metal o-rings directly onto
the strap attachment.
Follow these steps to attach the binocular tether straps.
1. Thread the wide end of
the binocular tether straps
through the harness strap
buckles.
2. Size to fit by adjusting the
one-size-fits-all harness strap.
3. Thread the binocular tether
straps through the strap
attachments on binocular.
4. Thread the binocular tether
straps back through the tether
strap buckles to secure.
1. Push a few inches of the strap
through the strap attachment
on the binocular.
2. Hold the buckle and thread
the end of the strap through
the buckle.
3. Adjust the overall length, then
pull tight until strap secured
within the buckle.