Operation Manual

3
5 6
www.vortexoptics.com www.vortexoptics.com
Attach the padded neckstrap to the binocular in
three simple steps. Begin with the right barrel of the
binocular and repeat the process for the left barrel.
The Neckstrap
1. Push a few inches of the
strap through the neckstrap
attachment point on the
binocular.
2. Loop the strap over the
attachment point, then
thread the strap through
the strap buckle.
3. Secure the end of the
strap by slipping it
through the strap loop.
IPD
The multi-step eyecups on the Fury binocular twist up
and down so any viewer can take advantage of the long
eye relief and enjoy comfortable, full-field viewing.
With eyeglasses or sunglasses,
retract the eyecups.
Without eyeglasses or sunglasses,
extend the eyecups.
Adjusting the Eyecups.
The twist-up eyecups are built on a solid frame, tapered
to fit the contour of the eye, and covered with rubber.
Adjusting the Interpupillary Distance.
The interpupillary distance (IPD) is the distance
between the centers of the left and right eye pupils.
Match the IPD of your eyes
to that of the binocular by
rotating the binocular barrels
inward or outward until you
see a single image that is free of
shading.
Customizing the Fury