ARGO LAB MIX Mixer User manual
1 1 W arranty Thank you for purchasing an instrument Argo Lab. This instrument is warranted under normal use for a period of 24 months from the date of purchase. The warranty is valid only if the product is in original conditions. It does not apply to any product or parts of it that have been damaged due to incorrect installation, improper connections, improper use, accident or abnormal conditions of operation.
2 appropriate accessories. 1. Safety instructions • • • • Read the instructions carefully before use Ensure that only qualified personnel using this tool Do not heat flammable or highly volatile substances Before use, make sure the instrument is connected to an outlet with a ground connection. • At work, employees shall prevent the risk of: - Spillage of liquids. - Mechanical vibrations that may cause breakage of glass containers.
3 Listing of items 2. Proper use The instrument has been designed to mix the liquid in school labs, chemical, pharmaceutical, industrial etc. This device is not suitable for use in domestic environments. 3. Inspection The instrument Mix contains: Items Quantity Instrument 1 Power cable 1 User manual 1 Open the instrument and check that the instrument and accessories are all perfectly intact and show no signs of tampering or damage.
4 5.1 Operating mode “continuous” 5 Commands Head ON OFF shaking Picture 3 Power on Adjustment LED knob Power ON/OFF 1 – Mode “touch” 0 – Switch OFF 2 – Mode “continuous” Picture 2 • Ensure that the knob for adjusting the speed of agitation is positioned to a minimum. Place the instrument on a stable surface and connect it to the mains. • Set the main switch to the ON position to the left. The Power LED lights up and the unit begins to operate in "continuous" mode.
5 5.2 Operating mode “touch” Touch OFF Picture 4 Make sure that the knob for adjusting the speed of agitation is positioned to a minimum. Place the instrument on a stable surface and connect it to the mains. • Set the main switch to the TOUCH right. • Turn the control knob until the desired speed is set. • If a tube is pushed vertically on head rotation, it starts to work and the power led lights up. • To switch off, switch the master switch in the middle position (OFF).
6 7 Associated standards and regulations 8 Technical data Construction in accordance with the following safety standards: EN 61010-1 Voltage frequency Power 220V – 50/60Hz 60 W Motor Eccentric Stirring speed 0… 2.500 rpm Speed indication Operating mode Dimensions (L x D x H) Analogic at scale “Continuous” or “touch” 127×130×160 mm Weight Use temperature Use relative humidity max IP class 3,5 kg 5 - 40 °C 80% IP21 UL 3101-1 CAN/CSA C22.
7 9 Disposal Information regarding the disposal of electrical and electronic equipment European Union. Electrical and electronic equipment marked with the symbol shown below may not be disposed in landfills. In accordance with EU Directive 2002/96/EC, the European users of electrical and electronic equipment have the opportunity to give back to the distributor or manufacturer upon purchase of a new one. The illegal disposal of electrical and electronic equipment is punished with an administrative fine.