Full Product Manual
ENGLISH
5
ACTIVATE YOUR CAMERA
1. Start the VOSKER app and select “Activate a new camera”.
2. Select the model V150.
3. Open the case at the back of the camera.
• Scan the barcode from the camera.
4. Choose the type of surveillance you are going to do with your
VOSKER security camera.
5. Enter your personal information.
6. Your camera is now activated and you will receive a conrmation
message by email.
SETTING THE APP
The VOSKER app will let you congure all of the camera’s settings (Basic
Cellular and Advance options). At the bottom of the app, press Settings.
Use the arrows to make changes to settings. These new settings will take
eect the next time the V150 camera connects to update its status. Here
are the most important settings, there are more available in the app.
BASIC SETTINGS
Mode - PHOTO
Delay: Sets the time interval between each detection before the camera
records the next photo.
Multi-shot: Takes up to 2 consecutive shots at each detection, with
a 5 second delay between each photo.