User Manual

Care should be taken when handling
cutting blades especially when removing
blades from containment cups, emptying
containment cups, and during cleaning
Thank you for choosing our High Speed Blender. All the staff
of our company will serve you wholeheartedly. In order to use
this machine correctly and effectively, please read this manual
carefully before using .
Do not put metal objects such as knives, forks, spoons,
etc. into the cup.
When cleaning, do not clean the knife directly by hand.
If you use cleaning tools, please pay attention to safety.
The contents of the cup should not be too full. Do not
exceed two thirds of the capacity of the cup.
Please close the lid of the cup when using.
Before starting, make sure the cup is on the base.
It is completely fixed on.
Because of the high horsepower, please hold the cup
slightly when you start to use it.
Be sure to cover the cup when using the stirring bar
while the motor is running.
Whether the cup is placed on the table or not.
Do not use your hand to fetch food from that cup because
the blade is sharp and easy to cut.
To pour food out, remove the cup from the frame.
Be careful to touch the switch before and after
start-up.
Utensils cannot be immersed in water.
Pictures are for reference only,
please refer to the material object!
1
steam cap
2
cup cap
3
mixing cup
4
cup mat
5 6
start switch
7
pulse switch
8
timer
9
base bottom
rubber feer
3
2
1
4
5
6
7
8
9
Rated voltage: ：100-120V~
220-240V~
Rated frequency: 50Hz/60Hz
Rated capacity:2L
Execution standard:IEC 60335-1、IEC 60335-2-14
HS-206 Series Technical Parameters
Ⅰ.Major Component Name
Ⅲ、Main Technical Parameters
Ⅱ.Points for Attention
●Start Switch
The switch is preset to “ ”before delivery.
Turn the switch to the “ ” position to start the product.
Turn the switch to the “O” position to stop the product.
●Pulse Switch
The switch is preset to “ ” before delivery.
Turn the switch to the“ ” position to run the product at
full speed.
If you release the switch, it will automatically return to
the “ ” position.
●Low/High Speed Switch
The switch is preset to “Low Speed” before delivery.
Turn the switch to the “Low Speed” position to run the
product at low speed.
Turn the switch to the “High Speed” position to run the
product at high speed.
PULSE
IV. Function Introduction