User`s manual

~ 17 ~
˙Do not press any keys on the keyboard while the selected computer is booting up.
This is true for any PC, whether stand -alone or connected to a KVM08.
Q : The computers boot up fine, but the keyboard does not work.
A : ˙Check the cables and make sure they are inserted properly in the correct ports.
˙Make sure the keyboard works when directly plugged into the computers.
˙Try a different keyboard, but use only 101,102 or 104-key keyboards.
˙Make sure that the keyboard driver is for 101, 102 or 104-key keyboards, and not
old XT keyboards.
˙Check to make sure that the power cord is plugged in and is working properly.
Make sure the power switch is on.
˙ Reset the KVM 08 by simultaneously pressing the Bank/SCAN and Channel
buttons on the front panel. Access the OSD menu again and it should have
re-detected all the active ports.
PS/2 Mouse Problems at the console or computers
Q : The mouse is not detected during boot-up.
A : ˙Check the cables and make sure they are inserted properly in the correct ports.
˙Check your computer / motherboard documentation making sure that the PS/2
mouse port (or IRQ) is enabled.
˙ Make sure the mouse is directly plugged into the computer. Rebooting is
necessary when trying this. If the computer still does not detect the mouse, then
your computer’s PS/2 mouse port has a problem.
˙ Reset the KVM08 by simultaneously pressing the Back/SCAN and Channel
buttons on the front panel. Access the OSD menu again and it should have
re-detected all the active ports.
Q : The computer boot up fine, but the mouse does not work.
A : ˙Check the cables and make sure they are inserted properly in the correct ports.
˙Make sure the mouse works when plugged into the computer. Rebooting is
necessary when trying this. If the mouse pointer still does not move, then either
your PS/2 mouse port or the mouse itself has a problem.
˙Try a different mouse.
˙Make sure the mouse is a true PS/2 mouse. A combo mouse will work just a s
long as it is set for PS/2 mode with the correct adapter. A serial-only mouse with
a combo mouse adapter WILL NOT work.
˙Check to make sure that the power cord is plugged in and is working properly.
Make sure the power switch is on.