User Manual

5. Storing Settings
To save your personal settings, you need to be in User Program Mode, and use the chicken head knobs to adjust
the amp, and use the effects section to dial in any desired effects. To store your settings, hold down any one
of the 4 program buttons for two seconds, and your new settings will be saved to that program location.
Note: You cannot store programs that were altered in Manual Mode or Preset Mode. To save your programs, you
must dial in the settings in the User Program Mode only. (Refer to section 5 for how to store programs).
6. Using Manual Mode
In Manual Mode, the Knobs are as they appear
on the amp’s face plate. However, In Preset
and User Program Modes, the knobs will not
represent the actual stored settings.
To access Manual Mode, simply press the
Manual Button. Now you can dial in any desired
settings, using any or all of the Chicken Head
knobs, on the face plate. You can also adjust
the effects section. (Refer to section 4 for
how to edit the effects).
7. Using the Power Level on the Back Panel
The power level knob on the VT’s rear panel may be used to turn down the amp’s overall volume.
Tone Tip: You may want to crank the amp’s Master volume, to get the interaction from the Tube Power section to
achieve optimum tone, and use the Power Level on the back panel, to adjust the amp’s output, to a reasonable
listening volume.