Musical Instrument Amplifier User Manual

REAR PANEL FEATURES

1. FOOTSWITCH JACK

Connect the optional VFS2 Dual Footswitch to this jack.

2. EXTERNAL SPEAKER OUTPUT JACK

An external loudspeaker system can be connected to your

amplifier by using this socket. This socket disconnects the

amplifier from the internal loudspeaker.

WARNING! To ensure that your system works cor-

rectly, you must observe the following points.

a) Only use an external cabinet with a combined

impedance of 8ohms.

b) Don’t connect a speaker whose rated input capac-

ity is less than 15 watts (for AC15VR) or 30 watts (for

AC30VR). The speaker may be destroyed if you

ignore this caution—not recommended!

c) You must use a speaker cable to connect an exter-

nal speaker. Don’t use a shielded cable like the one

you use to connect a guitar to an amp.

d) You must turn off the power before connecting the

cable. Connecting the cable while the power is turned

on may damage your amp.

3. MAINS POWER CONNECTOR/FUSE

The mains power required by your amplifier is connected

using this device.

WARNING! Use only the power cord supplied with

your amplifier, or a replacement of the exact same

specification.

WARNING! Only connect this amplifier to a suitable

mains power supply that matches the rating indicated

on the back panel of your AC30VR/AC15VR ampli-

fier. IF IN ANY DOUBT CONTACT YOUR DEALER!

AC15VR

AC30VR

231