Owner`s manual

3. GUITAR/MIC jack

This input jack combines a 1/4" phone jack for guitar with an XLR jack for mic.

NOTE: The volume might be insufficient if you connect a mic to the 1/4" phone jack.

4. PHANTOM switch

Turn this switch on when you connect a condenser microphone that requires phantom power. When

the phantom power is being supplied, the indicator above the switch lights up. Phantom power is

supplied only to the XLR jack.

NOTE:You must turn the PHANTOM switch off if you've connected a mic that does not require phan-

tom power.

NOTE:Before you turn the PHANTOM switch on or off, be sure to set the MASTER volume control

down. Also, before you connect a microphone to the GUITAR/MIC jack, be sure to turn the

PHANTOM switch off.

5. GUITAR jack

Plug in your guitar using a high-quality shielded cable.

6. GAIN switch

Set the input gain to “LOW” or “HIGH” depending on the volume level of the musical instrument

that’s connected to the GUITAR or GUITAR/MIC jack.

7. VOLUME knob

This control knob enables you to adjust the volume level of the musical instrument that’s connected to

the GUITAR/MIC or GUITAR jack. Use this control on each channel to adjust the level and balance

between the Tube Pre and Normal channels.