User Manual
Table Of Contents
- Table of contents
- Quick Start
- Basic operation
- Items in the screen
- Performing
- Creating your own sounds
- Library / List
- Music player
- Playing a song
- Selecting and playing a song you’ve added to the library
- Rewinding or fast-forwarding the song
- Adjusting the song’s volume
- Adjusting the song’s pitch
- Adjusting the song’s tempo
- Playing back one or more songs repeatedly
- Playing a looped region in a song
- Switching guitar programs while the song plays - Auto Change function
- Recording
- Playing a song
- GXT (Guitar XTracktion) function
- Option pedal/switch settings
- Preference settings
JamVOX owner’s manual
14
3 In the amp/cabinet control panel, use “CABINET” to select a cabinet
model.
Click the displayed cabinet model name and choose from the catalog,
or use the ππ
ππ
/††
††
buttons to select a cabinet model.
For details on the types of cabinet model, refer to “JamVOX Effect
guide” (PDF).
If you don’t want to use a cabinet model, turn the BYPASS switch
(located at the left of the cabinet model name) off so that the indicator
is dark.
4 Use the control knobs in the amp/cabinet control panel to adjust the
sound of the amp.
For details on the amp parameters, refer to “JamVOX Effect guide”
(PDF).
5 Drag and drop effects in the effect routing section to add them to the
routing line. You can also drag and drop effects to change the order in
which they are connected.
6 Click an effect that you want to edit.
The panel of the selected effect will appear below the amp/cabinet
control panel.
7 In the effect control panel, use “EFFECT MODEL” to select an effect
model.
Click a displayed effect model name and choose from the catalog that
appears, or use the ππ
ππ
/††
††
buttons to select an effect. The panel design
will depend on the effect model that’s selected.
You can also access the catalog by double-clicking an effect that’s
shown in the effect routing, or by clicking the effect name.
For details on the types of effect model, refer to “JamVOX Effect
guide” (PDF).
If you don’t want to use a selected effect model, turn its BYPASS
switch (located at the left of the effect model name) off so that the
indicator is dark, or drag and drop it in the effect routing area to
remove it from the routing line.
8 Use the control knobs of the effect control panel to edit the effect
parameters.
For details on the available parameters, refer to “JamVOX Effect
guide” (PDF).
9 You can edit other effect models as described in steps 6 and 7.
Depending on the amp model or effect model settings, the JamVOX
monitor’s output may clip. If this occurs, adjust the output level of
the amp model or the distortion-type effect model.
10 If you need to adjust the volume, such as when there are volume dis-
crepancies with other guitar programs, adjust the PROG LEVEL
that’s located at the upper right of the effect routing.
11 Click the utility Save button or Save As button to save the guitar pro-
gram (☞“Saving a guitar program” on page 16).