User Manual

32
Option pedal/switch settings
Using a pedal for control
JamVOX lets you use an optional pedal or foot switch connected to the
JamVOX monitor to control a variety of functions.
Expression pedal settings
For each program, you can individually specify the effect that will be con-
trolled by an optional Korg EXP-2 controller connected to the JamVOX
monitor, and how it will be controlled.
HINT:
Assigning a parameter to the expression pedal and operating it in
this way is the same as using the pedal instead of the knob to edit the
sound. When you use SAVE or SAVE As to save the program, it will
be saved with the sound specified by the pedal position at that
moment. However, if the expression target is “OFF,” Modulation
“PITCH,” Delay “INPUT” (controls the input level to the delay), or
Reverb “INPUT” (controls the input level to the reverb), the pedal
will not be editing the parameter of the guitar program. Also, the
delay effect and reverb effect do not have an “INPUT” parameter.
Assigning a parameter to the expression pedal
Here’s how to assign an effect parameter to the expression pedal.
As an example, we’ll assign the “PITCH” parameter of the PITCH
SHIFTER modulation effect to be controlled by the pedal.
1 Choose PITCH SHIFTER as the modulation effect.
2 Press the utility Pedal button.
The FOOT SWITCH and EXPRESSION
PEDAL edit screens will appear.
3 From the menu that appears when you click EXPRESSION PEDAL
“TARGET,” choose PITCH SHIFTER - PITCH.
4 Specify the expression pedal’s Max value (the value when the pedal is
fully advanced) and Min value (the value when the pedal is fully
returned).
You can check the result by dragging in the edit screen.
NOTE: The “MIN” and “MAX” values will be initialized if you change
the “TARGET” of EXPRESSION PEDAL.
5 Click the Pedal button to close the edit screen.
If you want to save your settings, click the SAVE button or SAVE As
button. If you switch to a different program or close JamVOX without
saving, the settings you made will be lost.
In addition to the example described above, a large number of effect
parameters specified for each effect model can be freely assigned to
the expression pedal.
NOTE: When you change the effect model of the parameter that is
assigned to expression, the “TARGET” parameter will be initial-
ized, and will be OFF. (However, the Amp “GAIN” or “VR
GAIN,” the Delay “INPUT,” and the Reverb “INPUT” are excep-
tions.)
HINT: If you selected VOX WAH as the effect model for pedal effect 1 or
2, the expression pedal function will automatically be assigned to
MANUAL (the wah pedal position). In this case, changing the
pedal effect to another model without performing any other
operation will also return the “TARGET,” “MIN,” and “MAX”
settings to their previous state. (However, if the pedal effect
(PEDAL FX) function is assigned, it will be initialized “OFF”
without returning to its previous state.)