User Manual

21
4. PHASER
This models a popular analog phaser in a banana-colored box.
5. TEXTREM
This models the acclaimed tremolo circuit built into a US-made
combo amp.
6. ROTARY
This models a rotary speaker.
7. PITCH SHIFTER
This is a pitch shifter that allows you to play chords, and has a
variable range of one octave upward or downward.
8. FILTRON
This is an envelope-controlled filter (wah) that opens or closes a
filter according to the input from the guitar.
Knob/Switch Parameter
EDIT RESONANCE* Adjusts the amount of resonance.
TA P SPEED*
Adjusts the modulation speed in a range of
0.1...15 Hz.
TAP+EDIT SPEED* Adjusts the speed.
Knob/Switch Parameter
EDIT DEPTH* Adjusts the tremolo depth.
TA P SPEED*
Adjusts the modulation speed in a range of
1.0...15 Hz.
TAP+EDIT SPEED* Adjusts the speed.
Knob/Switch Parameter
EDIT DEPTH* Adjusts the modulation depth.
TA P SPEED*
Adjusts the modulation speed in a range of
0.8...15 Hz.
TAP+EDIT SPEED* Adjusts the speed.
Knob/Switch Parameter
EDIT BALANCE*
Adjusts the balance between direct sound and
effect sound.
TA P PITCH*
Specifies the amount by which the pitch of the
effect sound will be shifted; an octave, a 4th, or a
5th.
Each time you press the switch, the setting will
cycle between -12, -7, -5, DT (Detune), +5, +7,
+12, -12.
TAP+EDIT PITCH*
Specifies the amount by which the pitch of the
effect sound will be shifted in semitone units (100
cents).
The setting will change as follows: -12, -11, ... -1,
0, DT (Detune), +1, ... +12
Knob/Switch Parameter
EDIT SENS*
Adjusts the sensitivity to the guitar's volume.
If this parameter is assigned to the expression
pedal, the cutoff frequency will be controlled by
the expression pedal, meaning that the opening/
closing of the filter will not be affected by the input
from the guitar.
TA P TYPE
Specifies the direction of movement (up or down).
If Up is selected, the TAP switch LED will light.
TAP+EDIT RESONANCE* Adjusts the amount of resonance.