User Manual
Table Of Contents
- Table of Contents
- Introduction
- Panel Tour for the guitarist (Top and rear panels)
- Making connections
- Trying out the programs
- Creating your own sounds
- Saving a program
- About the amp models, cabinet models, and effect types
- Tuner
- Using the expression pedal for control
- Connecting to your computer (USB connection)
- Restoring the factory settings
- Troubleshooting
- Preset program list
- Specifications
2
Panel Tour for the guitarist (Top and
rear panels)
Here we’ll introduce you to the switches, controls, and connec-
tors on the ToneLab ST’s top panel.
Top panel
1. Amp section
Here you’ll create settings for the amp model.
For details on each effect, refer to “Amp models” (p.13).
a.
AMP bank select switch and LED
Use this to switch the bank, or to turn the amp model on/off.
Each time you press the switch, the bank will cycle between STD
(Standard), SPL (Special), CST (Custom), STD ...
The color of the LED will indicate the bank that’s selected.
•
STD (Standard): green
•
SPL (Special): orange
•
CST (Custom): red
The LED will be lit if the amp model is on. By holding down this
switch for about one second you can switch the amp model on/
off.