User Manual
Table Of Contents
- English
- Table of contents
- Introduction
- Panels
- Connect your instrument and turn on the power
- Playing programs
- Creating phrases
- Overdubbing a performance by playing along with a recorded phrase
- Applying the Loop Effect to a recorded phrase
- Specifying how the loop will stop
- Resampling
- Applying the limiter to the recorded phrases
- Erasing a loop-recorded phrase
- Loop status
- About the Pre Effect and the Loop Effect
- Control pedal settings
- Restoring the factory settings
- Auto Power-Off function
- Troubleshooting
- Block diagram
- Main specifications
- Français
- Sommaire
- Introduction
- Panneaux
- Connexion de l’instrument et mise sous tension
- Jouer avec des programmes
- Créer des phrases
- Ajout d’un nouvel enregistrement à une phrase
- Traiter une phrase enregistrée avec un effet de boucle
- Mode d’arrêt de la boucle
- Rééchantillonnage (Resampling)
- Traiter les phrases enregistrées avec le limiteur
- Effacer la phrase d’une boucle
- Etat de la boucle (Loop Status)
- Pré-effets et effets de boucle
- Réglages de la pédale d’expression
- Rétablir les réglages d’usine
- Coupure automatique d’alimentation
- Dépannage
- Schéma de principe
- Fiche technique
- Deutsch
- Inhaltsübersicht
- Vorweg
- Bedienelemente
- Anschließen des Instruments und einschalten
- Spielen von Programmen
- Aufzeichnen von Phrasen
- Ergänzen einer Phrase um weitere Parts
- Bearbeiten aufgezeichneter Phrasen mit dem Loop-Effekt
- Festlegen, wie die Schleife endet
- Resampling
- Bearbeiten aufgezeichneter Phrasen mit dem Limiter
- Löschen einer Loop-Phrase
- Loop-Status
- Über den Pre- und Loop-Effekt
- Einstellungen für das Expression-Pedal
- Laden der Werkseinstellungen
- Energiesparfunktion
- Fehlersuche
- Blockschaltbild
- Wichtigste technische Daten
18
VOX Dynamic Looper Owner's manual
Playing programs
On the Dynamic Looper, settings for the Pre Effect and Loop
Effect are collectively called a “program.” The internal
memory contains 100 programs.
Here’s how to select one of these programs, and then apply
an effect to the sound from your guitar or mic, or apply an
effect to the recorded phrases.
Applying an effect to your guitar
performance or mic audio
Let’s select and try out some of the programs.
1.Connectyourguitarormicandamp,andthenturnon
thepower.
) p.16 “Connect your instrument and turn on the power”
2.Verifythattheprogram/valuedisplayshowsaprogram
number.
If the display shows a value other than a program number,
or if the display is blinking, press the CANCEL button.
The program number will appear.
The Dynamic Looper contains two types of programs:
preset programs and user programs.
P01–P50: These are preset programs. You cannot save your
own settings to a preset program.
U01–U50: These are user programs. When the Dynamic
Looper is shipped, these have the same content as the
preset programs, but you are free to modify the effect type
and parameter values and save the result in one of these
user programs.
Toswitchbetweenpresetprogramsanduserprograms,hold
downtheWRITEbuttonforapproximatelytwoseconds.
3.UsethePROGRAMUPpedaltoswitchprograms.
When you press the PROGRAM UP pedal, the program
number will change to the next program up.
If you hold down the PROGRAM UP pedal and press the
TRIGGER/TAP pedal, the program number will change to
the next program down (PROGRAM DOWN).
By pressing the AUTO REC button and the CANCEL
button simultaneously, you can advance the program
number in steps of 10.
4.Ifyoudon’thearthePreEffect,pressthePREFX
TARGETbuttontoselecttheinputthatthePreEffect
willprocess.
Each time you press the button, the setting will alternate
between the following, and the button indicator will
change color.
Green: The Pre Effect will apply to the input from the
INPUT jack.
Hint: If both a guitar and a mic are connected, the signal
from the mic will be output without change (i.e., without
the pre-effect applied). If desired, you can disable (mute)
the audio from the MIC IN jack at this time. Hold down
the PRE FX TARGET button and turn the EDIT knob. The
display will show the setting you’ve selected.
CoF: Audio from the MIC IN jack is disabled (muted).
Con: Audio from the MIC IN jack is enabled.