User Manual
Table Of Contents
- English
- Table of contents
- Introduction
- Panels
- Connect your instrument and turn on the power
- Playing programs
- Creating phrases
- Overdubbing a performance by playing along with a recorded phrase
- Applying the Loop Effect to a recorded phrase
- Specifying how the loop will stop
- Resampling
- Applying the limiter to the recorded phrases
- Erasing a loop-recorded phrase
- Loop status
- About the Pre Effect and the Loop Effect
- Control pedal settings
- Restoring the factory settings
- Auto Power-Off function
- Troubleshooting
- Block diagram
- Main specifications
- Français
- Sommaire
- Introduction
- Panneaux
- Connexion de l’instrument et mise sous tension
- Jouer avec des programmes
- Créer des phrases
- Ajout d’un nouvel enregistrement à une phrase
- Traiter une phrase enregistrée avec un effet de boucle
- Mode d’arrêt de la boucle
- Rééchantillonnage (Resampling)
- Traiter les phrases enregistrées avec le limiteur
- Effacer la phrase d’une boucle
- Etat de la boucle (Loop Status)
- Pré-effets et effets de boucle
- Réglages de la pédale d’expression
- Rétablir les réglages d’usine
- Coupure automatique d’alimentation
- Dépannage
- Schéma de principe
- Fiche technique
- Deutsch
- Inhaltsübersicht
- Vorweg
- Bedienelemente
- Anschließen des Instruments und einschalten
- Spielen von Programmen
- Aufzeichnen von Phrasen
- Ergänzen einer Phrase um weitere Parts
- Bearbeiten aufgezeichneter Phrasen mit dem Loop-Effekt
- Festlegen, wie die Schleife endet
- Resampling
- Bearbeiten aufgezeichneter Phrasen mit dem Limiter
- Löschen einer Loop-Phrase
- Loop-Status
- Über den Pre- und Loop-Effekt
- Einstellungen für das Expression-Pedal
- Laden der Werkseinstellungen
- Energiesparfunktion
- Fehlersuche
- Blockschaltbild
- Wichtigste technische Daten
35
About the Pre Effect and the Loop Effect
SPd: SPEED
This effect lets you use the control pedal to change the loop
playback speed.
• EDIT knob: Specifies how the playback speed will change
when you operate the control pedal.
SL1: When you advance the pedal, the playback will slow
down. The phrase’s pitch will not change.
SL2:When you advance the pedal, the playback will slow
down. The phrase’s pitch will change in proportion to the
playback speed.
FA1: When you advance the pedal, the playback will
speed up. The phrase’s pitch will not change.
FA2: When you advance the pedal, the playback will
speed up. The phrase’s pitch will change in proportion to
the playback speed.
SF1:The playback will speed up when you advance the
pedal beyond the mid-point of its operating range, and will
slow down when you return the pedal toward yourself
from the mid-point. The phrase’s pitch will not change.
SF2: The playback will speed up when you advance the
pedal beyond the mid-point of its operating range, and
will slow down when you return the pedal toward
yourself from the mid-point. The phrase’s pitch will
change in proportion to the playback speed.
• Control pedal: Controls the playback speed of the
recorded loop. Depending on the setting of the EDIT
knob, the pitch will change together with the playback
speed. The result is similar to changing the rotational
speed of a record.
Scr: SCRUB
This effect divides the loop-recorded phrase into grains
(short fragments of sound), and lets you use the control
pedal to freely change the playback position; i.e., to “scrub”
through the phrase. This is particularly effective when used
on guitar solos or arpeggios.
• EDIT knob: Adjusts the length of the grains (short
fragments of sound).
• Control pedal: Controls the playback position within the
loop.
Starting from the pedal in the fully-returned position,
advancing the pedal will scrub through one cycle of the loop.
Advancing the pedal will play forward, and returning the
pedal will play backward. The speed at which you operate
the pedal will control the playback speed.
When you’re not operating the pedal, playback will occur
slowly.
Stt: STUTTER
This effect lets you use the control pedal to control the duty
cycle, allowing you to create rhythmical loops. It is effective
when used on sounds that have a stable loudness, such as
sound processed by compression or distortion. The content
of the effect is the same as the Pre Effect “STUTTER.”
) p.31 “Stt: STUTTER”