User Manual

ManualsBrandsVox ManualsElectric and Liturgical OrgansContinental 73 + Original Stand Tribute! - ORGAN COMBO 73 KEYS

En-4

Main Functions of Each Part Front panel

Main Functions of Each

Part

Front panel

1: Master control

These controls set the overall volume, vacuum tube (Nutube)

drive volume, keyboard dynamics sensitivity, keyboard octave

and so on. (See page 12)

2: Part select

Selects the sound part for performance (ORGAN, E.PIANO,

PIANO, KEY/LAYER).

Up to two parts can be turned on and played at the same time.

(See page 12)

3: ORGAN part

Selects the variation for the CX-3, VOX, or COMPACT organ

sound. (See page 13)

You can also control the percussion, vibrato/chorus, and rotary

speaker simulation.

There are two types of settings, one for UPPER (the upper part

of the keyboard) and one for LOWER (the lower part of the

keyboard). You can split the keyboard into upper and lower

parts, or use an external MIDI keyboard to play the lower part

of the VOX Continental.

The touch sensors can be used to control the drawbars.

4: E. PIANO part

Selects the typical tines and reeds for vintage electric piano,

and the sound variations for the FM-type electric piano. (See

page 14)

5: PIANO part

Selects the sound variations for the grand, upright, and electric

grand piano sounds. The grand piano sound uses large, non-

looping waveform samples in full stereo sound across the

keyboard for both delicate and powerful, richly expressive

sound. (See page 14)

6: KEY/LAYER part

Selects various types of sound variations, such as clavinet,

brass, strings, synthesizer and so on. (See page 14)

You can use the touch sensors to control the amp EG, filter or

LFO.

7: Touch controls

You can simultaneously control multiple settings by touching

the nine touch sensors with LEDs.

These sensors control the organ drawbars, KEY/LAYER filter,

EG, LFO and the overall EQ settings. (See page 15)

8: Scene select

Selects the scene. There are 16 scenes, which are used to store

your favorite variations or effects and instantly recall them

during live performance or other situations. (See page 17)

The EXIT button is also used when making system settings.

9: EFFECTS controls

Sets the trio of effects including the EFFECT (chorus, phaser

and so on), DELAY and REVERB, as well as the EQ (equalizer).

(See page 18)

10: Bend lever

Used to switch between speeds for the organ rotary speaker

simulation, turn the tremolo of the electric piano on/off, and bend

the pitch of the KEY/LAYER variation up or down. (See page 9)

11: Keyboard

The keyboard of the VOX Continental is velocity sensitive, but

aftertouch is not supported. This keyboard features waterfall

keys, making it possible to perform glissandos, trills and so on

like with a vintage tonewheel organ. (See page 9)

10 11

5 6