User Manual
EnglishFrançaisDeutschEspañol
En-7
Turning the Power On/Off 4. Connecting to a MIDI device or computer
4. Connecting to a MIDI device
or computer
An external MIDI keyboard or sequencer can be connected to
the VOX Continental in order to control its sound generator; or
the keyboard and touch sensors on the VOX Continental can
be used to control an external MIDI sound generator.
For details on connecting via MIDI, refer to the
“VOX Continental MIDI Setting Guide” (PDF).
Playing an external MIDI keyboard with LOWER
(lower part of the keyboard) on the organ
There are two types of settings on the ORGAN part variations,
one for UPPER (the upper part of the keyboard) and one for
LOWER (the lower part of the keyboard). An external MIDI
keyboard can be played as the LOWER part. (See page 20)
Turning the Power On/Off
1. Turning the power on
1 Turn the VOLUME knob on the VOX Continental all the
way to the left so that the volume is down.
Make sure that the volume on any external output devices
that are connected (such as powered monitor speakers) is
turned down and that the power is turned off.
2 Press the power button on the VOX Continental.
All of the touch sensor LEDs will light, and the keyboard
will be ready to play once a number is shown in the
VARIATION display.
3 Turn on the power of the external output devices that are
connected to the OUTPUT jacks of the VOX Continental,
such as powered monitor speakers.
4 Adjust the VOLUME knobs on the VOX Continental and
on your external equipment to set the volume to a suitable
level.
2. Turning the power off
Scenes that have not been saved will be lost when the
power is turned off, so be sure to save them beforehand.
(See page 11)
1 Lower the volume on your powered monitor speakers or
other external output device, and then turn off their power.
2 Turn the VOLUME knob on the VOX Continental all the
way to the left.
3 Hold down the power button on the rear panel of the VOX
Continental. When
OFF
is shown in the VARIATION
displays of the PIANO and KEY/LAYER parts, release the
power button.
The instrument is storing its settings while
OFF
is shown.
Make sure that the AC adapter stays plugged in until
OFF
is no longer shown. Failure to do so may cause a
malfunction.
When a set period of time has passed without playing the
keys, turning the knobs or pressing the buttons on the
VOX Continental, the power will turn off. This function is
called “auto power off”, and the factory-set default is 4
hours. This time can be adjusted. (See page 21)
2
1, 4
Power button
Variation
number
Touch
sensor