Owner`s manual
8
VOX Lil' Looper Owner's manual
FX: Eect
The eect is used to process the signal from the INPUT
jack.
There are a total of 12 eects. Each eect includes
three eect types. You can select and use one eect
at a time.
Each eect has two adjustable parameters. The
parameters that can be adjusted may vary according
to the eects that are selected.
Loop
Each loop records the signal from the eect. There
are two loops: Loop 1 and Loop 2. You can record
phrases totaling a recording time of 90 seconds for
the two loops.
Metronome
You can use the metronome as a guide while recording
a loop.
If the metronome is on, the Loop Quantize function
will also be activated. This function automatically
corrects the loop-end timing according to the specied
tempo, leing you create phrases that are exactly the
correct length.
When headphones are connected to the HEADPHONES
jack, the metronome sound can only be monitored with
the headphones.
VOX VFS2 (option)
When the optional VOX VFS2 foot switch is connected
to the EXT.SW jack, it can be used to turn the eect on
and o, select the eect type, stop the operation of each
loop separately or delete phrases.
Inserting or Replacing Batteries
The Lil' Looper requires six AA-size baeries. Korg
recommends that you use alkaline (LR6).
Do not combine new and used baeries or dierent
types of baeries.
1. CheckthatallthebuonsandLEDsarenotlitup
andthatthepoweristurnedo.
2. Removethebaerycasecover.
3.
Ifthebaeriesareinthecase,removethemfrom
thecase.