Specifications

36
Restoring the factory settings
Here’showtorestoretheToneLabEXtoitsfactory‐setstate.
NOTE: This operation will initialize the programs you’ve
saved,returningallofthemtothe factory‐setpro‐
grams.
NOTE: Neverturnthepoweroffwhile initialization isbeing
performed.
1. Turnthepoweroff(STANDBY).
2. While ho
lding down the EXIT/TUNE switch and
EXPRESSION
switch,turnthepoweron(ON).
3. When the program pedal 1–4
 LEDs blink, release the
switches.
HINT: Ifyoudecidetocancelthisprocedure,presstheEXIT/
TUNEswitch.
4. PresstheWRITEswitch.
Initializationwillbecompleted,theprogramdi
splaywill
indicate“ ”andthenautomaticallyreturnstoprogram
selectmode.
Troubleshooting
Power doesn't turn on when you turn the ON/STANDBY
switch on
•IstheACadapterconnectedtotherearpanelDC12Vjack?
•IstheACadapterpluggedintoanACoutlet?
•IstheACoutletwork
ingproperly?
•CouldtheACadapterbedamaged?
No sound
•Cou
ldthevo
lumeofyou
rguitarbeturneddown?
•Isyourguitarcableconne
ctedcorrectly?
•Couldyourguitarcablebebr
oken?
•Could the rear panel LEVEL knob and SPEAKER LEVEL
knobbesettotheminimumvalue?
•CouldthetoppanelVOLU
MEandGAINcontrolsbesetto
theminimumvalue?
•CouldthesettingsoftheTREBLE,MIDDLE,andBASScon‐
trolsbesettotheminimumvalue?
Forsomeampmo dels
,theremaybenosoundfromthe
ampiftheTREBLE,MIDDLE,andBASScontrolvaluesare
low.
• Makesurethatyourheadphonesorconnectioncableisnot
defectiveorbroken.
•Could the expression pedal be assigned as gain and vol‐
ume,andreturnedallthewaytowardyourself?
•Couldyouhaveactiva
tedthetunerinamutedstate?