User's Manual

BBW200 User Manual v1.0 2
1.4. Specifications
Radio Bluetooth Low Energy
Range Up to 30 meters
Class IP43
Humidity
Operating Range
0 to 100% RH
± 4.5 % RH max @ 20–80% RH)
Temperature
Operating Range
–20 to +85 ºC / -4° to 185°F
Typical accuracy ±0.5 ºC / ± 0.5°
Min accuracy ±1 ºC / ± 0.9°F
Consumption 0.28 mA typical
Working Voltage 3V (2 AAA batteries)
Operation Time Approx. 6 months
Dimensions 80x80x22mm / 3.14x3.14x0.86 inches
Weight Approx. 30g / 1.05 oz
1.5. Compatibility
The BBW200 SmartClim can be connected directly via local access mode or remotely
using an optional gateway. Local access mode is supported with SmartPad app by the
following Bluetooth Smart Ready Smartphones and tablets:
- Apple iPhone 4s and next, iPad 3 and next, iPod touch 5 and next models
- Android models with OS 4.3 and more
- Windowsphone models with OS 8.1 and more
2. LOCAL ACCESS MODE
2.1. Introduction
Local access mode describes the direct control using a SmartPhone or a Tablet as a
remote controller. This requires the “BeeWi SmartPad” application to be installed in the
controller device.
2.2. Initial Settings
To use SmartClim in local access mode, it is necessary to download and install the “BeeWi
SmartPad” application on Smartphone or Tablet devices. This app is available on the app
stores for compatible iOS, Android and WindowsPhone devices.
2.3. Pairing
Before using SmartClim, it is necessary to securely pair the Smartphone and SmartClim
together. This way, only authorized Smartphone or Tablet will be able to access the sensor.
1) Download and install the BeeWi SmartPad app.
2) Fit batteries in the SmartClim sensor. The sensor will be visible for pairing during one
minute after it has been powered on.
3) Open the app and press “Add Peripheral” to look for your peripheral and initiate
pairing.
4) Once “BeeWi SmartClim” is listed, select it to pair it. After successful pairing, a new
box is showing in the app home screen.