User manual

60
ENGLISH
PART NAMES AND FUNCTIONS
27. MIDI A/B / Recall Cues Yes or No buttons
Under the MIDI mode, press this button to switch PLAYER A/B. Under recall cues mode, Y(Yes) for recall the
cues and N (No) for quit recall mode.
28. SGL/CTN Switch button
This function allows you to switch single track play or continuous track play (all tracks in order).
SGL = Single
→
The current title is played; the player goes into pause mode.
CTN = Continue
→
The entire CD or folder will be played; afterwards the player switches to pause mode.
29. Time display mode Switch button
The button will switch the time display mode in the Time Mode Indicator between ELAPSED playing time and
TRACK Remaining time.
30. Minus Button
Moves the Time Division Indicator
31
to the left.
31. Time Division Indicator
Indicates the time division used by the FX Sync (in beats) and Loop Set (in bars).
FX Beat SYNC (Yellow LED ) - This is used to select the delay time of an effect to the beat of music. The beat
delay ratios are 1/4, 1/2, 3/4, 1/1, 2/1, and 4/1.
LOOP SET (Red LED) - When the loop set function is activated, select the loop length of 1/64, 1/32, 1/16, 1/8,
1/4, 1/2, 1, 2, 4, 8, 16 (1 bar = 4 beat) at which you would like to start your desired loop.
32. Plus Button
Moves the Time Division Indicator
31
to the right
33. FX Sync & Auto Loop Set Switch Button
Use this button to switch time division for FX SYNC (Yellow LED) or LOOP SET(Red LED).
34.Shift Button
Hold the SHIFT button enables to call up a second function.
MIDI Shift Function : When in MIDI mode a second MIDI command can be carried out by using the Shift
Button. Further details regarding this function can be found in the chapter MIDI MAP.
35. Hold button
This button allows you to set and lock any new parameters you set to the effects. Otherwise, the effect
parameters always return to the original value. This button will glow when the hold function is activated.