User manual

ENGLISH

PART NAMES AND FUNCTIONS

40. Y Parameter (Depth) Button

This button is used to adjust the Y parameter (Depth) value. You can push the button and turn the JOG WHEEL

to adjust the parameter value.

41. Auto Loop Button

Press this button to activate AUTO LOOP function. Press IN button, and OUT point will be found automatically

according to the BPM value.

CAUTION

: The Auto Loop Function is based on BPM. Therefore, without correct BPM the function can’t

work. Before use the Auto Loop function, please make sure the BPM counter already count

the correct BPM.

42. Reverse Button

When engaged (illuminated) playback will occur in the opposite direction (backwards). This function works for

normal playback, sample playback and loop playback. Press the button again to deactivate the reverse effect.

The LED goes off.

43. LOOP IN & REAL TIME CUE Button

This function allows you to set a CUE POINT without music interruption. This button also sets the starting point

of a seamless loop.

44. LOOP OUT Button

This button is used to set the ending point of a loop. A loop is started by pressing the IN button, pressing the

OUT button set the loop ending point. The loop will continue to play until the RELOOP/EXIT button

is pressed

once again. During loop playback, press the LOOP OUT button. The display will show the loop-out point time,

and the LOOP OUT button will ﬂash, while the LOOP IN button indicator turns off. Rotate the jog wheel to adjust

the loop out point. Press Loop Out again to save the new out point and exit the adjust mode.

45. RELOOP/EXIT Button

If a SEAMLESS LOOP has been made, but the player is not actively in seamless loop mode, pressing the reloop

button will instantly reactivate the seamless loop mode. To exit loop, press the button again. RELOOP will

appear in the VFD display when the RELOOP function is available.

During play mode, pressing the RELOOP button will instantly return play to the last set point without interrupting

playback.