User manual

70
ENGLISH
LINK UP Two P70s
With this function a USB device can be loaded into one VOXOA P70, and played by a connected Host USB Player.
Follow the directions below to setup the link function. This function ONLY work for USB device.
MAIN PLAYER :
1. Press the Enter button
21
to enter the Utility Menu.
2. Once you are in the utility menu, turn the FOLDER knob
23
until MIDI SETUP is displayed.
3. Rotate the jog wheel until the USB = LINK is displayed, and press the Enter button
21
to save the setting and exit.
4. Now load your USB device into the MAIN PLAYER. You can load the USB device into USB 1 port
2
or USB 2
port
47
.
NOTE
: Choosing USB1(2) Port or USB 2 Port
47
are depended on the “Utility Setting”. You can setup
this function via the Utility Menu/MIDI SETUP/LINK/ USB1 or USB2.
5. Connect the MAIN PLAYER using the rear panel USB MIDI port
48
to the second player top panel USB 1port
2
.
6. You should now be able to access the main player loaded USB device using the second player controls.
NOTE
: Before the second player can read the sharing external USB device, the main player must read
the USB device first.
NOTE
: Using LIKE UP function actually you can connect several players together. However, this might
cause reading data delay or unexpected error. We highly recommend LINK UP TWO PLAYERS
ON LY.
SECOND PLAYERSECOND PLAYER
MAIN PLAYER
USB 1
USB MIDI PORT
USB 2