User manual

74
ENGLISH
OPERATIONS
Setting Hot Cues / Loops
To save a Hot-cue points/Loops point to an empty bank pad, simply press one of the empty bank pad. It will flash
orange, and then turn solid orange, letting you know that a Hot-cue point/Loop has been stored.
•
Buttons containing hot cue points will light orange.
•
Buttons containing loop data will light Blue
Setting Hot Loops, Loops must be created using the main loop interface (LOOP IN/OUT button
43
44
. Once a loop
is created, following the setting process.
Step 1 : During playback (loop play) or pause, press the REC button
14
. Now the record mode is active and the
REC button
14
is light.
Step 2 : Press the desired pad from the Bank Pads (1, 2, 3, 4)
13
at the point you wish to set as a hot-cue points
or loops in that pad. You can overwrite any existed Hot-cue.
Step 3 : Press the REC button
14
again to exit the Hot Cues setting mode.
Press the stored Hot-cue pads again, and playback will seamlessly restart from the stored Hot-cue point and the
pad will flash. You can repeatedly press the pads to create a stuttering effect. If the player is in pause or cue mode,
pressing the button will start playback from the stored cue point, but will only keep playing while the button is
depressed, just like the main CUE button
17
.
Clearing the stored Hot-Cues/Loops
Press the CLEAR button
15
to active clear memory function. While the button is on, press the pad(s) you wish to
clear and those pads will also flash. The cleared pads’ light is off, letting you know that there is no information stored
in them. Press the CLEAR button
15
again to exit the clear memory mode.
How to Record Hot Cues/Loops
Every track can be record 4 cue points or loops. The player will record and recall cue points and loops saved to the
four pads for up to 2000 memos.
For the external USB device, the numbers depended on the available memory space of the USB device. In general,
the saved data size is very small so you don’t worry about the quantity.
To save current cue points, loops, and setting, press and hold the REC button
14
until the display reads SAVING.
•
Using CD/MP3 or external USB device
First of all, you have to insert the USB or CD/MP3 and then press the REC button
14
to active the Recall function.
Rotating the knob
22
to choose the music. If the music had saved Hot Cues/Loops, the player will recall the
saved automately. The LCD display will display “RECALL”. The pads will flash one after another. When the last
pad has reloaded, then you can press a pad to recall a cue point or loop.