User manual

M10
21
ENGLISH
PART NAMES AND FUNCTIONS
11. Channel fader (CF) mode switch
Reverses the direction of Channels fader.
12. Crossfader curve switch
Used to select the 2 different rising curve patterns for the crossfader function.
13. MIC ON/OFF/TALKOVER switch
To set mic on and off, when switch at the talkover position, the mic on, the sound level for everything other than
mic will decrease to around 14 dB.
14. MIC HIGH / BASS EQ
These knobs are used to adjust the high (or bass) levels of the microphone with a maximum signal gain of
12dB or maximum signal decrease of -12dB. Turning the knob in a counterclockwise direction will decrease the
amount of high (or bass) applied to the microphone signal, turning the knob in a clockwise direction will increase
the amount of high (or bass) applied to microphone signal.
15. MIC Ievel
Adjusts microphone level.
16. Input gain control knob
These knobs are used to adjust the audio source signal input gain for a channel. Never use the gain control to
adjust a channels output volume. Setting the gain level properly will ensure a clean output signal.
17. Channel equalizer high-range (HI) adjust knob
Use to adjust the high-range frequence sound for each channel (includes kill function). Adjustable range: -∞ to
+10dB.
18. Channel equalizer mid-range (MID) adjust knob
Use to adjust the mid-range frequence sound for each channel (includes kill function). Adjustable range: -∞ to
+10dB.
19. Channel equalizer low-range (LOW) adjust knob
Use to adjust the low-range frequence sound for each channel (includes kill function). Adjustable range: -∞ to
+10dB.
20. Level meter
The dual LED's indicators are used to detail either the master output level, a combination of the master output
level or the PGM 1/2 monaural level.