User's Manual

Unpack
Make sure you have the following items in your 808 EarCanz
Fly package:
• 808 EarCanz Fly Bluetooth earbuds
• USB charging adapter
• Eartips in 3 sizes (1 size installed)
• Ear fins (installed)
For best performance, we recommend you charge your
EarCanz Fly earbuds fully before using them.
Open the DC IN flap on the side
of the controls below the right
earbud.
Plug the included USB charging
adapter into the charging jack
behind the DC IN flap.
Plug the other end of the adapter
into a USB power source (like a
computer or a USB charger).
The indicator light on the front
of the controls turns red while
the earbuds are charging. It turns
blue when the earbuds are fully
charged.
Unplug the USB charging adapter
when the earbuds are charged.
To turn on the EarCanz Fly and start
pairing to your Bluetooth device:
Press and hold the
button on the
controls for about 6 seconds (until
the indicator on the controls starts
blinking rapidly).
To turn on your EarCanz Fly
regularly: Press and hold the
button on the controls for 1–2
seconds. The indicator on the controls
starts blinking slowly.
1. Charge the EarCanz Fly
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
IMPORTANT: If you’ve previously paired your phone or other Bluetooth
device with these earbuds, the earbuds will automatically attempt to
reconnect to that device when you turn them on. If you want to pair to
a new device, turn the earbuds o. Then press and hold the button on
the controls for about 6 seconds (until the indicator on the controls starts
blinking rapidly) to put the earbuds in pairing mode. Once the indicator on
the controls starts blinking, go to step 3 to pair and connect.
Right earbud
(side)
2. Turn on the EarCanz Fly 3. Pair + Connect
Choose 808 EarCanz Fly from the pairing
options on your smartphone. (If it’s not in
the list, choose “Scan” from your phone’s
Bluetooth menu.)
Enable Bluetooth on your smartphone or
other device.
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Settings
8
:45PM
The earbuds beep when the process is complete. The indicator
on the controls turns solid blue.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The earbuds’ Bluetooth wireless connection works up to a range of roughly
33 feet (10 meters). This range may vary, however, based on other factors,
such as room layout, wall material, obstacles, your device’s Bluetooth
performance, etc. If you’re having problems connecting to the earbuds,
move closer to your phone.
• Make sure your device supports audio transfer A2DP.
• If your device asks you for a password to connect, use “0000”.
To pair the EarCanz Fly again
After turning your earbuds back on, they automatically
attempt to reconnect to the last connected device. If the
last connected device is not available, the earbuds will enter
pairing mode and be ready to pair to a new or dierent device.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and
specific instructions.
To turn the EarCanz Fly o: Press and hold the button on the controls
for 3 seconds.
R
R
R
Right earbud
(side)
R
R