User's Manual

Unpack
Make sure you have the following items in your 808 EarCanz
TRU package:
• 808 EarCanz TRU Bluetooth earbuds
• Micro USB charging cable
• Eartips in 3 sizes
• Ear fins in 3 sizes
• Travel case
For best performance, we recommend you charge your
EarCanz TRU earbuds fully before using them.
Open the
flaps on the bottom
of each earbud.
Plug the micro-USB ends of the
included USB charging cable into
the charging jack behind the
flap on each earbud.
Plug the other end of the charging
cable into a USB power source (like
a computer or a USB charger).
The indicator light on the side of
each earbud turns red while that
earbud is charging. It turns white
when the earbud is fully charged.
Unplug the USB charging cables
when the earbuds are charged.
Place each earbud in its assigned
ear (marked R or L on the inside
of each bud).
1. Charge the EarCanz TRU
If you have any questions about this product, visit
808Audio.com or call our toll-free help line at
1-800-732-6866.
IMPORTANT: If you’ve previously paired your phone or other Bluetooth
device with these earbuds, the earbuds will automatically attempt to
reconnect to that device when you turn them on. If you want to pair to a
new device, turn Bluetooth o on the previously paired device. The earbuds
will enter pairing mode. Then choose 808 EarCanz TRU from the pairing
options on the new device.
Right and left
earbuds (side)
2. Turn on the EarCanz TRU 3. Pair + Connect
Choose 808 EarCanz TRU from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
Enable Bluetooth on your smartphone or
other device.
Wi-Fi
Bluetooth
Bluetooth Settings
VPN Settings
Wi-Fi Setting
s
8
:45PM
The earbuds say “device connected” when the process is
complete. The indicators blink white every 6 seconds.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and
specific instructions.
To turn the EarCanz TRU o: Press and hold the button on
one of the earbuds for 3 seconds.
Right and left
earbuds
(bottom)
R
Right earbud
Right ear
To turn on the EarCanz TRU:
Press and hold the
button
on each earbud (front of the
left, back of the right) for
about 3 seconds, until you hear
“power on” from each earbud.
IMPORTANT: You must turn each
earbud on separately! For best
results, press both
at the same
time.
Linking for Wireless Stereo
After you turn them both on, the earbuds start the linking
process for wireless stereo. The indicator on the back of each
earbud starts blinking red, then white when the earbuds are
linked to each other. The left earbud says “left connected”
and the right says “right connected.” Now you’re ready to pair
with your smartphone or other Bluetooth device!
If you don’t hear “left connected” and “right connected”:
Turn the earbuds o (press and hold the
button until they
say “power o”). Then turn them both back on again.
TIP: You can use the right earbud by itself as an earpiece for
Bluetooth calls. Just turn it on by itself (and leave the left
earbud o).
Left ear:
FRONT
Right ear:
BACK