User's Manual

Listening to music
Set your device’s volume for music to 50%.
Note: This is to make sure the sound from the earbuds isn’t too loud
when you start streaming.
Start playing music or other audio on your device. Within
seconds, the earbuds start streaming the audio wirelessly via
Bluetooth.
Controlling playback and volume
The
button on either earbud lets you control music playback
wirelessly.
To play/pause music: Press the
button.
To adjust volume: Use the volume controls on your phone.
Answering/ending phone calls
The right earbud has a built-in microphone, so you can use it
for phone calls. Your phone will ring through the right earbud
when you’re receiving a call.
To answer or end a phone call: Give a short press on the
button.
To decline a phone call: Press and hold the
button for one
second.
IMPORTANT: Not all phones support playback control and phone answer/
end control. Check your phone’s user manual for more information if you’re
having trouble with these functions.
quick start guide
HPA225 QSG 01
Using the EarCanz TRU
Putting the EarCanz TRU in your ears
The EarCanz TRU earbuds come with medium-sized eartips
and ear fins installed. You can use dierent-sized tips and
fins, but first try them with the medium sizes.
Changing the eartips or fins
Find the L and R markings on the
buds.
Place each eartip in your ear as
shown here. The fin should go in
the small ridge just above your ear
canal on your outer ear—it might go
automatically, or you might need to
move it into place.
If the tips or fins don’t fit, follow the directions in the next
section to change them.
If you want to use a dierent size ear fin or bud, find the size
you want, and match the L/R fins to L/R buds.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The earbuds’ Bluetooth wireless connection works up to a range of roughly
33 feet (10 meters). This range may vary, however, based on other factors,
such as room layout, wall material, obstacles, your device’s Bluetooth
performance, etc. If you’re having problems connecting to the earbuds,
move closer to your phone.
• Make sure your device supports audio transfer A2DP.
• If your device asks you for a password to connect, use “0000”.
To pair the EarCanz TRU again
After turning your earbuds back on, they automatically
attempt to reconnect to the last connected device. If the
last connected device is not available, the earbuds will enter
pairing mode and be ready to pair to a new or dierent device.
Forget to turn on your device’s Bluetooth before turning on the
earbuds? Just give a quick single-press to the
button on either
earbud once you’ ve turned on your device’s Bluetooth to reconnect
to it.
3. Pair + Connect (continued)
L
Left earbud
Left ear
Turning the EarCanz TRU Off
To turn the EarCanz TRU o: Press and hold the
button on
one of the earbuds for 3 seconds.