Video Baby Monitor System What’s inside User Guide Welcome!................................................................. 2 Getting started....................................................... 3 Tour of the system................................................ 7 Everyday use..........................................................13 Cameras....................................................... 14 Motion/Alerts............................................. 18 Recording...............................
Getting Started WELCOME! This baby monitoring system makes it simple to keep your eyes and ears on your little one! This guide takes you through the steps to get started! Step 1: Unpack Parent monitor See our setup videos Go to ProjectNursery.com/ Electronics or scan the QR code here. Wireless camera (Models PNM402 and PNM502 come with 2 wireless cameras) The accessories: Before you start... Make sure you read the Important Information sheet included in this package.
Step 2: Charge the monitor Find one of the charging cables included in this package. Getting Started GETTING STARTED Step 3: Position the camera(s) Find a location for the camera that gives you the best view of your baby in his or her crib. Plug one end of this cable into the USB CHARGING jack on the side of the parent monitor. Plug the other end of the charging cable into one of the included charging adapters. Then plug the adapter into an outlet or surge protector.
Getting Started Step 4: Plug in the camera(s) Find the other charging cable(s) included in this package. Plug one end into the DC In jack on the back of the camera(s). Step 5: Turn on the monitor Press and hold the POWER button on the parent monitor to turn it on. Congratulations! Your system is ready to use! The camera(s) comes pre-paired with your parent monitor. However, it’s a good idea to go ahead and set the time on your parent monitor now, before you start using it.
Getting Started Step 6: Set the date and time on the monitor 1 Press the MENU button on the parent monitor. The menu appears on screen. 4 Use the up/down arrow buttons to set the month, day, and year. 12:00AM Temperature Time Set Factory Reset Support Product Information SD Card Information 2 Use the arrows to highlight SETTINGS. Press OK/ZOOM to select it. The Settings menu appears on screen.
TOUR OF THE SYSTEM Parent Monitor accesses the system’s menu screens. Tour of the system turns the monitor on and off (press and hold). and turn the volume down/up. In menu screens, these navigate left/right. zooms the camera in/out. Press and hold to start pan/tilt of the camera, then use the arrows to pan and tilt. and Watching baby You can turn the display on and off without turning the monitor off. You’ll still hear your baby, but the display will be asleep until you awaken it.
Parent monitor side and back panels Built-in easel stand USB CHARGING jack plugs into your charging cable to recharge or power the parent monitor. Built-in easel stand lets you stand the unit on a flat surface. Pan, Tilt, and Zoom Talking to baby Listening to baby To zoom the active camera: Press the OK/ZOOM button on the parent monitor. To talk through the speaker on the active camera: Press and hold the TALK button on the parent monitor.
Status Bar Indicators Parent monitor Tour of the system 72º Temperature reading shows the strength of the current camera’s signal. 2:35 PM Temperature reading shows the temperature in Fahrenheit at the active camera. If you want to change this to Celsius, see page 27 for instructions. shows the camera that the monitor is currently displaying. indicates that the Low Battery Noise alert is on. This means the monitor gives an audio signal when it needs to be recharged.
indicates the Lullabies are playing through one of the cameras. See page 24 for instructions on playing lullabies. indicate that the monitor is scanning through the available cameras. The number indicates how quickly the monitor switches cameras. See page 17 for information on turning camera scanning on and off. indicates the level of the monitor’s rechargeable battery. If you see it’s time to recharge. See page 3 for more information.
Camera Microphone Nighttime sensor Adjustable antenna Tour of the system DC In Pair button Mounting keyholes Power (right side) turns the camera on and off (press and hold). Pair (bottom) links the camera securely with the monitor (press and hold). DC In (back) plugs into your charging cable to recharge or power the camera. Mounting keyholes (bottom) let you mount the camera on a wall (mounting hardware not included). Adjustable antenna communicates wirelessly with the parent monitor.
3. EVERYDAY USE 12:00AM Parent Monitor Menu Everyday use This system’s menus let you set up more cameras, set motion and temperature alerts, and much more. This section takes you through each menu. GETTING AROUND IN THE MENUS Press MENU to access the menus. Use the arrows to highlight items. Press OK/ZOOM to select.
Cameras The Cameras menu lets you pair additional cameras or remove them from your list of cameras. It also lets you change the volume of the audio coming from the camera speaker, or view several cameras at once, using multi-view on your monitor or scanning through them one by one. Parent Monitor Front ACCESSING THE CAMERAS MENU 1 2 Press MENU on the parent monitor. Use the arrow buttons to highlight the Cameras icon, and press OK/ZOOM to select it.
12:00AM View Camera Pan/Tilt Camera Scan Cameras Pair Camera Delete Camera Camera Volume Pair: Pair: Pair: Pair: Camera Camera Camera Camera 3 Press the Pair button on the bottom of the new camera. 4 Use the up/down arrows to select Pair: Camera 2, Pair: 1 2 3 4 Camera 3, or Pair: Camera 4. Press OK/ZOOM to select it.
12:00AM View Camera Pan/Tilt Camera Scan Cameras Pair Camera Delete Camera Camera Volume VIEWING AND SCANNING CAMERAS You can customize how you view your cameras on screen. To view a different camera: 1 72º 12:00AM View Camera Everyday use Pan/Tilt Camera Scan Cameras Pair Camera Delete Camera Camera Volume View: Camera View: Camera View: Camera View: Camera Multi-view In the Cameras menu, highlight View Camera. Press OK/ ZOOM to select it.
12:00AM View Camera Pan/Tilt Camera Scan Cameras Pair Camera Delete Camera Camera Volume Scan: Scan: Scan: Scan: To scan through the cameras automatically: 1 Off 5 Secs 10 Secs 15 Secs 2 Use the up/down arrows to select how quickly you want to switch cameras: every 5, 10, or 15 seconds. Press OK/ ZOOM to select that option. The screen switches to the first camera, and the status bar at the top of the screen shows an , , or . It also shows the indicator for scanning: camera you’re viewing.
Motion/Alerts The Motion/Alerts menu lets you set up alerts that are activated by motion, sound, or temperature in your baby’s room. It also lets you set up an alert for when the monitor’s rechargeable battery needs to be recharged. Parent Monitor Front ACCESSING THE MOTION/ALERTS MENU 1 2 Press MENU on the parent monitor. Use the arrow buttons highlight the Motion/Alerts icon, and press OK/ZOOM to select it.
72º 12:00AM Motion Activated Video Sound Activated Video: OFF Temperature Alert: OFF Low Battery Noise Alert: OFF 2 Use the up/down arrows to select the amount of sensitivity you want for the motion sensor: ON: Low, ON: Medium, or ON: High. The status bar at the top of the screen shows an indicator for motion activation: . OFF ON: LOW ON: Medium ON: High SETTING UP SOUND ACTIVATION You can set up the monitor so that it automatically shows video when the camera detects sound from your baby.
72º 12:00AM Motion Activated Video: OFF Sound Activated Video: OFF Temperature Alert Low Battery Noise Alert: OFF High Temp: ON: 81 OFF Low Temp: ON: 63 OFF SETTING TEMPERATURE ALERTS These alerts tell you when your baby’s room is too hot or too cold. 1 In the Motion/Alerts menu, select Temperature Alert. 2 Activate the temperature alert you want to use, then set it. The status bar at the top of the screen will show an indicator for temperature alerts: .
Recording The Recording menu lets you record video or take a picture of your baby. IMPORTANT: You must have a Micro SD card (not included) inserted in the MICRO SD slot on the side of the parent unit in order to record images or video. See page 8 for more information. 1 2 12:00AM 72º Take Picture Record Video Press MENU on the parent monitor. Use the arrow buttons to highlight the Recording icon, and press OK/ZOOM to select it.
Playing Back Pictures and Videos The Play menu lets you access the videos or pictures you’ve taken with the system. IMPORTANT: You must have a Micro SD card (not included) inserted in the MICRO SD slot on the side of the parent unit in order to record images or video. See page 8 for more information. ACCESSING THE PLAY MENU 1 Everyday use 2 Press MENU on the parent monitor. Use the arrow buttons to highlight the Play icon, and press OK/ZOOM to select it.
Sleep Mode You can set up your monitor to turn off the display automatically after a set amount of time. Parent Monitor Front ACCESSING THE SLEEP MODE MENU 1 Use the arrow buttons to highlight the Sleep Mode icon, and press OK/ZOOM to select it. Everyday use 2 Press MENU on the parent monitor. 12:00AM 72º Sleep Mode (video off, sound on) OFF ON: 5 mins ON: 30 mins ON: 60 mins SETTING SLEEP MODE 1 In the Sleep Mode menu, press OK/ZOOM to turn sleep mode on.
Lullabies This Project Nursery system comes with 3 lullabies, 2 nature sounds, and white noise ready to play—simply choose the one you want, and the camera you’re on will play it back. PLAYING LULLABIES OR WHITE NOISE Parent Monitor Front 1 Make sure the monitor is displaying the camera you want to play the lullaby on. If you want to play on a different camera, press the MENU button and select CAMERAS. Then press OK/ZOOM to select View Camera and choose the camera you want.
Contrast You can adjust the contrast and brightness of the display, and set it to automatically dim after a set amount of time. ADJUSTING CONTRAST OR BRIGHTNESS 1 2 3 4 12:00AM 72º Adjust Contrast Adjust Brightness Auto Dimming Press MENU on the parent monitor. Use the arrow buttons to highlight the Contrast icon, and press OK/ZOOM to select it. In the Contrast menu, highlight the option you want to adjust, Adjust Contrast or Adjust Brightness, and press OK/ZOOM to select it.
Settings The Settings menu lets you customize the monitor to match your preferences. It also gives you technical information about the monitor and support. ACCESSING THE SETTINGS MENU Parent Monitor Front 1 2 Press MENU on the parent monitor. Use the arrow buttons to highlight the Settings icon, and press OK/ZOOM to select it.
12:00AM Temperature Time Set Date: 01/01/16 Time: 12:00 AM Factory Reset Support Product Information SD Card Information SETTING THE TIME AND DATE 1 In the Settings menu, press the down arrow to highlight Time Set. Press OK/ZOOM to select it. 2 Use the up/down arrow buttons to set the date. 3 After setting the year, press the right arrow to adjust the time. Then use the up/down arrows to set the time. Press OK/ZOOM when you’re finished.
4. TROUBLESHOOTING / FAQS Most issues with the Project Nursery baby monitoring system can be solved by following one of the troubleshooting tips below. For additional assistance, please call 1-844-393-7338. I don’t see video from the camera on my monitor. + Make sure your monitor is turned on (press the Power button). If it is, press the VIDEO ON/ OFF button to make sure the monitor’s display is awake. Make sure the camera is plugged in to a working outlet and turned on. I see the icon on the screen.
+ Make sure the microphone on the camera is not blocked. The microphone is just above the lens. The lullabies aren’t playing. + If you have multiple cameras, make sure you’ve chosen the one you want the lullabies to play on before you start the lullaby. Go to Cameras > Select Camera and choose the camera you want. Then go to Lullabies and select an option to play. The temperature alerts don’t work.
©2016 Voxx Accessories Corp.. 3502 Woodview Trace, Suite 220.