User's Manual

Bluetooth wireless is a quick and easy way to connect a
smartphone to a speaker or a headset. There are basically
two steps to making Bluetooth work.
PAIRING: The two devices get
to know each other.
CONNECTING: The two devices
do something together (like play
music).
“Hi. I’m a
phone.”
This guide takes you through the steps to get started.
Getting to know Bluetooth
“Hi phone.
I’m a speaker.”
Make sure the following items came in this package.
• Your speaker • USB-micro charger • Carabiner
Step 1: Unpack
Before you start using the Tether speaker for the first
time, it’s a good idea to charge it completely.
Speaker bottom
Step 2: Charge your speaker
The indicator on the top of the speaker
is red while the speaker is charging.
It turns o when the speaker is fully
charged.
Note: You can use the speaker while it’s charging.
Step 3: Turn on
Press and hold the button
on the top of the speaker. The
power up tone sounds and
the indicator on the top of the
speaker starts blinking.
After a few seconds, the
speaker goes to Bluetooth
pairing mode to set up with
your smartphone.
Enable Bluetooth on your smartphone or other device.
Step 4: Pair + Connect
If you’ve previously paired your phone or other Bluetooth device with this
speaker, the speaker will automatically attempt to reconnect to that device
when you switch the speaker on. If you want to pair to a new device, give
a short double-press to the
button. The speaker gives a signal and the
indicator starts blinking.
Make sure the indicator on the top of the
speaker is blinking rapidly. (If it isn’t, give
a short double-press on the button. The
speaker gives an audio signal.)
The speaker gives an audio signal when it’s finished pairing
and connecting to your smartphone. The indicator on the top
of the speaker turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device
to device. See your device’s owners manual for more information and specific
instructions.
To charge the speaker: Open the
CHARGING flap on the bottom of
the speaker. Plug the included USB
charger into the DC IN jack behind
this flap.
Plug the other end of the USB
charging jack into a power source, like
a computer or a USB charging adapter.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the speaker’s AUX IN jack when
you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re
having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
• If you’ve paired your device with the speaker before but you’re having trouble
reconnecting when you turn the speaker back on, give a short press to the
button while the indicator on the top of the speaker is flashing. The speaker will
attempt to connect to a previously paired device.
Speaker top
Choose 808 TETHER from the pairing options on your
smartphone. (If it’s not in the list, choose “Scan” from
your phone’s Bluetooth menu.)
DC IN