Installation Guide

UNIVERSAL INSTALLATION 10”.1 SEATBACK ENTERTAINMENT SYSTEM (Seat Back Mount)
© 2018 Voxx Automotive, Inc. All rights reserved.
Page 6 of 8
730148A1
E. Mounting Monitor/ Bracket Assembly
1. Attach L Connector Harness to the rear of the
monitor. (Figure E1)
2. To properly secure the harness to the monitor,
first attach a wire tie to the eyelet next to the
connection. Install harness connector and secure
with the wire tie. Cut excess wire tie before
installing monitor.
(Figure E2a-c)
3. Slide Monitor / Bracket assembly under rear
edge of the guide post. Then slide front bracket
along front edge making sure middle bolt is in
the bracket slot. (Figure E3a-b)
Figure
E1
Figure
E2a
Figure
E2b
Figure
E2c
Figure
E3a