HR7012M / HR7012S Custom Vehicle Headrests with 7” Slim Style LED LCD Satellite Monitors or Built-in DVD Player for Rear Entertainment S HR7012M S P HR7012S Installation Guide Model DD7012 DM7012 MM7012 128-9047
IMPORTANT NOTICE Installation of headrest products require careful planning and preparation. Be extremely careful of seats that have airbags built into them. Keep wiring away from any air bag wiring (usually identified by yellow connectors and yellow wire jackets).Damage to air bag wiring can result in personal injury to vehicle occupants. If you have any questions regarding wire routing or installation in a vehicle, please contact Audiovox Technical Support at 1-800-225-6074.
MATERIAL TO USE IN THIS PACKAGE: 1) The wireless FMM Interface Box automatically determines which headrest is M1 and which headrest is M2 and sets each headrest to its own function (IR transmitter channel and IR receiver remote control codes). The headrests will still have the Pink/Green (MH1 and MH2) and Blue/ Yellow (SH1 and SH2) DIN cables on them and should be connected to their respective connectors.
OPTIONAL: 3) HR7012GP Game Module Package (P/N HR7012GP) (1 pc) OPTIONAL The Game Module Package contains the following items: a) Game Controller P1 (P/N 136-5239) - (1pc) SELECT S TA A TB B c) Game Module (P/N 136-5238) - (1pc) START P1 b) Game Controller P2 (P/N 136-5240) - (1pc) SELECT S TA A TB B d) Game Module Manual (P/N 128-9048) - (1pc) START P2 Note: The HR7012GP Game Package is the optional accessory package that allows upgrading to the wireless game source feature.
HR7012 SYSTEM OVERVIEW: 1) he HR7012 headrest system is available in three configurations; each T can accommodate an optional game pack module.
7) AV/USB Connector Access HR7012M (With DVD) HR7012S (Screen Only) S S PULL PULL DOWN VIDEO AUDIO L AUDIO R USB P WIRED HEADPHONE AUDIO R DOWN VIDEO AUDIO L AUDIO R AUDIO L VIDEO 8) Insert/Eject 20 degrees Insert/Eject Disc No Disc Slot HR7012M HR7012S 6
VEHICLE PREPARATION: 1) Read the manuals and get familiar with the electrical requirements and connections. 2) Prepare the vehicle by removing any interior trim necessary to gain access to the vehicle’s wiring as well as all areas where interconnecting wire harnesses will be located. The mounting method and the location will vary from vehicle to vehicle, so this manual will only focus on the installation of the Master and Satellite Monitors in the supplied configuration.
7) Connect all the components together (electrically) and verify proper operation of all the system functions. a) The headrest DIN cables and the FMM Interface Box DIN cables are color coded. Connect each headrest cable to the correct color cable on the FMM Interface Box. b) Extend the wireless FM antenna to its full length and orientate for best reception. Do not place it on the FMM Interface Box or near metal. c) Connect the DC power jack.
ELECTRONICS INSTALLATION/REPLACEMENT GUIDE Install Monitor Unit to Headrest Monitor Unit S S S (HR7012M) S P (HR7012S) Installation 2 1 a a b b a) Master/Satellite monitor headrest cable (MH1/SH1) 8 Pin Cable. b) Master/Satellite monitor headrest cable (MH2/SH2) 9 Pin Cable. a) Match MH1/SH1 monitor cable to M1 headrest connector b) Match MH2/SH2 monitor cable to M2 headrest connector 3 4 Rotate the screen up and move the locking tab to the right to lock the monitor into the headrest.
6 5 Note: Switch off the ACC power during cable and unit installation. Failure to do so may damage the unit. Reverse the procedure for removing the electronics.
HR7012 SYSTEM WIRING DIAGRAM HR7012M / HR7012S Master Monitor HR7012M / HR7012S Satellite Monitor S Connect to external source such as Blu-ray player, game console or multi-media head unit.
If you have any questions regarding this product or require technical assistance, please call 1-800-225-6074. © 2012 Audiovox Electronics Corp.
