Installation guide

7) Connect all the components together (electrically) and verify proper operation
of all the system functions.
a) The headrest DIN cables and the FMM Interface Box DIN cables are color
coded. Connect each headrest cable to the correct color cable on the FMM
Interface Box.
b) Extend the wireless FM antenna to its full length and orientate for best
reception. Do not place it on the FMM Interface Box or near metal.
c) Connect the DC power jack.
8) After verifying the proper operation of the system, mount each component.
9) When all the components are mounted, recheck the entire system to be sure
it is functioning correctly. Make sure that no wiring was pinched or connected
improperly during the nal installation.
100 CHANNEL WIRELESS FM MODULATOR:
The HR7011PKG is equipped with a 100 channel built-in wireless FM
Modulator*, that allows you to listen to the DVD audio signal by tuning your
vehicle’s radio to one of the selected frequencies:
(88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz, 89.1MHz, 89.3MHz, 89.5MHz,
89.7MHz, 89.9MHZ, 90.1MHz, 90.3MHz, 90.5MHz, 90.7MHz, 90.9MHz, 91.1MHz,
91.3MHz, 91.5MHz, 91.7MHz, 91.9MHz, 92.1MHz, 92.3MHz, 92.5MHz, 92.7MHz,
92.9MHZ, 93.1MHz, 93.3MHz, 93.5MHz, 93.7MHz, 93.9MHz, 94.1MHz, 94.3MHz,
94.5MHz, 94.7MHz, 94.9MHz, 95.1MHz, 95.3MHz, 95.5MHz, 95.7MHz, 95.9MHZ,
96.1MHz, 96.3MHz, 96.5MHz, 96.7MHz, 96.9MHz, 97.1MHz, 97.3MHz, 97.5MHz,
97.7MHz, 97.9MHz, 98.1MHz, 98.3MHz, 98.5MHz, 98.7MHz, 98.9MHZ, 99.1MHz,
99.3MHz, 99.5MHz, 99.7MHz, 99.9MHz, 100.1MHz, 100.3MHz, 100.5MHz,
100.7MHz, 100.9MHz, 101.1MHz, 101.3MHz, 101.5MHz, 101.7MHz, 101.9MHZ,
102.1MHz, 102.3MHz, 102.5MHz, 102.7MHz, 102.9MHz, 103.1MHz, 103.3MHz,
103.5MHz, 103.7MHz, 103.9MHz, 104.1MHz, 104.3MHz, 104.5MHz, 104.7MHz,
104.9MHZ, 105.1MHz, 105.3MHz, 105.5MHz, 105.7MHz, 105.9MHz, 106.1MHz,
106.3MHz, 106.5MHz, 106.7MHz, 106.9MHz, 107.1MHz, 107.3MHz, 107.5MHz,
107.7MHz,107.9MHZ).
This feature is accessed by using the FM transmitter buttons on the remote
(FMM ON/OFF).Whenever the FM Modulator is on, broadcast reception on the
vehicle’s radio will be poor. Switching off the FM Modulator will allow normal
radio reception.
*Note: In certain areas where there are a large number of FM radio stations
(e.g. large cities, urban areas), the reception of the FM signal may not
be satisfactory, resulting in static, distorted sound or signal bleed thru
from strong local radio stations. This is not a defect in the product, but
the result of a stronger local radio station overpowering the wireless FM
transmitter in your overhead pod.
If wireless reception is unsatisfactory, an optional wired relay box (Audiovox P/N
FMDIRB) can be installed which will improve audio quality. Please contact the
installer if this is the case with your product.
8