Owner`s manual
13
HR7012 REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
1. DVD disc insertion slot. (Figure 10)
2. IR TRANSMITTER and IR SENSOR
IR Transmitter: is used to broadcast audio
signal to the wireless IR headphones.
IR Sensor: is used to receive signals from
the remote control. (Figure 10)
3. POWER
( ) Button
This button is used to turn the HR7012D
ON and OFF. (Figure 10) (press and hold
for 5 seconds to turn OFF)
4. EJECT (
) Button
This button is used to eject the disc.
(Figure 10)
5. SOURCE (S) Button
This button is used to select the DVD/
USB, M1/M2, A/V IN, or GAME (optional).
(Figure 10)
6. STOP ( n ) Button
This button is used to stop the playback
of the disc or USB in use. (Figure 10)
7. Play
( ) Button
This button is used to begin playback of
the disc or USB inserted. (Figure 10)
8. HDMI/MHL INPUT
For connection of a device with
HDMI/MHL output. (Figure 10)
NOTE: Requires a HDMI/MHL enabled
device and a special HDMI/MHL adapter.
Contact your HDMI/MHL device supplier
for adapter. (see page 36 for more
information)
9. USB PORT
This port is used to connect a USB device
for playback of content. To view content,
select “DVD” as the video source and
insert the USB device. The USB device
will start automatically and take priority
over the DVD. To play DVD’s, disconnect
the USB device from the port. This port
may be used to charge a cellphone or
tablet see page 37 for more information.
(Figure 10)
10. Protective Cover
Used to protect and cover the HDMI jack
and USB port when not in use. (Figure 10)
11. PREVIOUS / LEFT (
) Button
Press and hold to skip to the previous
chapter or track during playback of a
disc. This button is used in the SYSTEM
MENU to adjust settings. (Figure 10)
12. DOWN q Button
This button is used to navigate selections
on the screen and can also be used to
navigate the DVD menu. (Figure 10)
13. NEXT / RIGHT (
) Button
Press and hold to skip to the next chapter
or track during playback of a disc.
This button is used in the SYSTEM MENU
to adjust settings. (Figure 10)
14. UP
Button
This button is used to navigate selections
on the screen and can also be used to
navigate the DVD menu. (Figure 10)
15. MENU/SELECT Button
This button is used to display and select
options on the System Menu when a
disc or USB media is not inserted. Press
and hold this button for 3 -5 seconds to
display the System Menu. (Figure 10)
16. 7-inch TFT LCD Display Screen
(800 x 480). (Figure 10)
Warnings
• Do not use any solvents or abrasive
cleaning materials when cleaning the
screen. Use only a lightly dampened lint
free cloth to wipe the screen if it is dirty.
• Lock the front panel in the fully closed
position when not in use. Do not put
pressure on the screen, caution children to
avoid touching or scratching the screen.
FRONT PANEL CONTROLSHR7012D continued